2005 White Se 4d Auto Fwd Cd 3rd Row Cloth Cruise on 2040-cars

Auto blog

Speedkore roaring into SEMA with twin-turbo AWD Charger Hellcat Widebody

Speedkore Performance is nowhere near finished with the Dodge Charger. At last year's SEMA show, the Wisconsin-based tuner showed a 1970 Charger Evolution with carbon and aluminum body panels, and a 996-horsepower Hellcat engine yoked to a six-speed transmission. This year the company teased a profile rendering of a 2020 Charger Hellcat Widebody on Facebook with the line, "All we're going to say is this all-wheel drive, twin-turbo, widebody Charger is going to be unveiled at the Magnaflow booth." Mopar Insiders extracted a tad more information, the first being that we're in for another tuned version of the 6.2-liter Demon Hemi V8 that's swapped its supercharger for twin turbos, and produces more than 1,000 horsepower. Last year, alongside that 1970 Charger, Speedkore unveiled a twin-turbo Hellcat-powered Demon making almost 1,400 horsepower. We don't know yet if this year's Charger will match that output — or exceed it — but we have a benchmark. An all-wheel-drive powertrain divides those horses so the tires have a chance of conquering them. Speedkore's mum on the mechanicals; the firm could have swiped a Grand Cherokee Trackhawk AWD unit and beefed it up, or created its own system.  Some of the steel body panels get carbon fiber replacements, and see those two holes in he front wheel arch? Those are exhaust outlets. MagnaFlow created a custom exhaust with a driver-selectable switch to port gases out the front, say at the track when decibels don't matter, or to send waste through MagnaFlow mufflers and out the rear pipes when silence is required.  The reveal happens at the Magnaflow booth in SEMA's Central Hall on November 5. Those that can't make the show can watch the reveal on MagnaFlowÂ’s Facebook page.

Dodge recalling 2k SRT Hellcat Challengers and Chargers for fuel leak

Bad news for fans of the obscene output of the Dodge Hellcat twins, as FCA has announced a voluntary recall of both 707-horsepower variants of the 2015-model-year Charger sedan and Challenger coupe. According to FCA, a total of 2,211 cars are being recalled after a dealer discovered a "possible fuel leak" during a pre-delivery inspection. Despite getting cleared by suppliers, FCA claims its engineers found "improperly installed" hose seals. Owners of affected vehicles will receive notification and be asked to report in for repairs. Of the vehicles affected, the overwhelming majority, 2,012, were sold in the US market. The remainder were sold in Canada (148), Mexico (30) and just 21 outside of North America. Scroll down for the official release from FCA. Related Video: Statement: Hose Seals March 1, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 2,211 cars globally to replace fuel-delivery components that may leak. An FCA US dealer alerted the Company to a possible fuel leak following a pre-delivery vehicle inspection. These components had passed the supplier's leak-testing, but FCA US engineers launched an investigation and discovered certain hose seals may have been improperly installed. The Company is unaware of any related injuries, accidents or customer complaints. Affected are model-year 2015 Dodge Challenger SRT coupes and Dodge Charger SRT sedans equipped with 6.2-liter V-8 engines. There are an estimated 2,012 in the U.S.; 148 in Canada; 30 in Mexico and 21 outside the NAFTA region. Affected customers will be notified and advised when they may schedule service. Customers with questions or concerns may call the FCA US Customer Information Center at 1-800-853-1403.

We're pretty sure the Challenger SRT Demon won't have 1,121 horsepower, but what if?

Dodge's slow rollout of the upcoming Demon continues, and with it comes endless speculation about what it all means. Every video, every image, and every press release contains some clue that points towards the Demon's final specs. We don't think any of it is random or arbitrary. This week cryptic image, a small plate with a name and two numbers, shows us a little more than last week's license plate. Unfortunately, Dodge will neither confirm or deny anything, meaning we have no way of knowing which rabbit hole to go down. Don't expect to see official horsepower, a quarter-mile time, or an MSRP until the New York Auto Show. The plate is attached to the crate of goodies that comes along with every Dodge Demon. This particular one is labeled with three things: Tom Coddington, serial number 0757, and VIN 001121. The name is simple enough. According to Hot Rod, Coddington was one of the original Ramchargers, a group of engineers in the early 1960s that helped Dodge get involved in drag racing. He was a fuel system specialist, motor consultant, and a rotating garage manager. All of that could be clues. While a name is easy enough to Google, the two numbers can't be broken down so easily. The crazier theory is that the car makes 1,121 horsepower and will do the quarter-mile in 7.57 seconds. Frankly, those numbers are about as likely as the Demon actually being powered by a Rolls-Royce turbofan engine from a Boeing 757 or packing a carburetor with 1,121 CFM. The Demon is going to be street legal, and the costs associated with making a 1,121-hp car meet emissions standards alone are assuredly astronomical. As our friends from Road & Track pointed out, the more likely theory is that 757 is actually the horsepower rating. This seems totally plausible, but it means we still don't know what 1,121 means. Surely it's not a drag strip time, as the standard Hellcat will do 1/4 mile in 11.2 seconds. Like before, if you have any ideas, post them in the comments. Until April, we'll keep trying to solve Dodge's demonic puzzle. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Road & Track, Hot RodImage Credit: FCA New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat