Clean In And Out! Sporty Interior! Check Out This Beautiful Dodge Caliber Sxt!! on 2040-cars

Auto blog

MotorWeek revisits the awesome, original Dodge Viper

MotorWeek is bringing the automotive world a wonderful blast from the past with its latest Retro Review. Not only does the video feature the now-famous, original Dodge Viper, but this is also a chance to watch one lapping Pocono International Raceway in a test of track prowess. This segment was MotorWeek's first chance to unleash the Viper around a racecourse, and the show took advantage of the opportunity. In addition to the usual 0-60 mph and quarter-mile tests, the 400-horsepower V10 is let loose to do lap after lap. The clip offers a great dose of nostalgia and is worth a watch to remember the intense enthusiasm surrounding the Viper at the time.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Happy Hellcat Halloween

Happy Halloween, everybody. There's no real Hellcat news in this post. No growl of the second-scariest Dodge Challenger SRT's 707-horsepower engine, no shriek of its supercharger. Just a Hellcat on a photo shoot. A little eye candy on Halloween. In a graveyard. With a black cat. (No cats were doomed to hell in the making of this feature.) But a Hellcat is a good kind of scary, so here are some of our previous galleries. And may a Hellcat cross your path soon. View 18 Photos View 17 Photos View 80 Photos Related Video: