2014 Se New 2.4l I4 16v Fwd Sedan Premium on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

Fiat Chrysler Automobiles recalls nearly 750k vehicles in two campaigns

Fiat Chrysler Automobiles is recalling a total of 747,817 vehicles in the US in two separate campaigns recently added to the National Highway Traffic Safety Administration database.
The first one covers about 434,581 units of the Chrysler 300, Dodge Charger, Challenger, Durango, and Jeep Grand Cherokee from the 2011-2014 model years with electric hydraulic power steering, the 3.6-liter V6 engine and a 160 amp alternator, according to FCA. In the affected vehicles, it's possible for the alternator to fail without warning and possibly cause the car to stall. According to the documentation submitted to NHTSA, the automaker began investigating the problem in August 2014 and has found possible evidence of one crash caused by the failures but no known injuries.
Customers will begin receiving notification about the recall next month, and obviously the repairs will be done at no cost to them.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.