2006 Dodge Viper Srt-10 on 2040-cars

Auto blog

Ringbrothers 1969 Dodge Charger Defector is a mean green machine

The 1969 Dodge Charger is one of the most recognizable cars ever built. Its debut at the peak of the muscle car era, sleek bodywork, and roaring Hemi V8 represented everything that was wonderful about American cars from the 1960s. It was fast, loud and moved like a greyhound off the line in search of that mechanical lure. Ringbrothers, the shop behind cars like the De Tomaso Pantera "ADRNLN" and t he Chevy Chevelle "Recoil," have unveiled its latest project - the 1969 Dodge Charger "Defector". Like most Ringbrothers projects, a first glance doesn't show much more than some wheels, new paint and a different ride height. Like any good custom car, the devil is in the details. The Defector falls into the restomod category, meaning it has classic looks but has been updated with modern parts and technology. This is the first time the shop has done a Mopar product, and they wanted to knock it out with the first attempt. While it may look stock, the bodywork has been significantly altered. Compared to a standard '69 Charger, the trunk lid is two inches shorter and the wheelbase has been increased by three inches. That means the car has new rockers and new quarter panels. The car was then painted in a BASF color called "Greener On The Other Side." It wears a black vinyl roof and a black stripe around the rear. The stripe and grille both sport the Ring Brothers logo. The car rides on 19-inch HRE wheels and uses Baer brakes with six-piston front calipers. The new rear subframe comes from Detroit Speed. The ancient steering rack has been replaced with a new rack and pinion unit. We assume this means it won't steer like a drunken hippo in a mudslide. Like the exterior, changes to the interior are subtle. It looks stock, but the seats wear new upholstery and the dash has been fitted with an Alpine stereo with a touchscreen display. The new steering rack is fitted with a nice Nardi steering wheel. The most modern update rests under the hood. In place of the old V8, Ringbrothers have swapped in a new 6.4-liter Hemi V8. It's the same one you'll find in any number of modern Mopar products. It's been tuned by Wegner Motorsports and exhales through a new Flowmaster exhaust system. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

FCA, Ford idle plants due to semiconductor shortage

DETROIT (Reuters) - Ford and FCA will become the latest automakers to idle production facilities due to a semiconductor shortage. Ford's Louisville Assembly Plant in Kentucky will idle for a week, borrowing a down period from later in the year to compensate. Per Automotive News, FCA is idling its Brampton facility in Ontario, Canada, and one other site which has not yet been identified.  Louisville Assembly is the production site for the Ford Escape and Lincoln Corsair SUVs; Brampton Assembly produces the Chrysler 300, Dodge Charger and Dodge Challenger for FCA.  A Ford spokeswoman, who declined to identify the semiconductor supplier, confirmed the temporary shutdown to Reuters. In this, FCA and Ford join Nissan and potentially Honda in idling production in the wake of the shortage, which also hit Volkswagen late last year. The shortages are being blamed on consumer demand for silicon after production slowdowns resulting from the coronavirus pandemic. Volkswagen said it had to adjust production schedules in China, Europe and North America to compensate.  Nissan said it planned to reduce production of the Note, a hybrid electric car, at its Oppama Plant in Kanagawa prefecture, Japan, but did not give details of the scale of the output cut. The Nikkei newspaper reported that Nissan would slash its Note production at Oppama to about 5,000 units in January, from an initially planned 15,000 units. "A global shortage of semiconductors has affected parts procurement in the auto sector. As a result of this shortage, the Oppama Plant in Japan will adjust production in January, reducing production of the Nissan NOTE," Nissan said in a statement. (This article contains reporting from Reuters.)     Auto News Plants/Manufacturing UAW/Unions Chrysler Dodge Ford