30th Anniversary Edition W/navigation, Dual Screen Blu-ray, Sunroof & Trailering on 2040-cars

Auto blog

More Ram trucks recalled over tailgate issue

Almost a year ago Fiat Chrysler recalled roughly 1.6 million Ram trucks over an issue with the locking power tailgate. The actuator limiter tab for the power locking mechanism could fracture, which would permit the actuator's lock-rod control to move beyond its limits. That would pull the locking rods open, thereby allowing the tailgate to open at any time. The 2018 recall covered Ram 1500, 2500, and 3500 pickups from the 2015 to 2017 model years, with the five-foot-seven and six-foot-four beds and the power locking tailgate option. Trucks with eight-foot beds, and those with manual-locking tailgates, were excluded. The trucks with eight-foot beds have been added to the recall as of earlier this month, putting 410,351 more trucks in the pool. According to Consumer Reports, Ram redesigned the locking assembly on the other two shorter bed sizes for trucks built after August 2, 2017, which was the end of the 2017 model year. But the eight-foot long-bed trucks didn't get the redesigned part until April 2, 2018 for some reason, making all eight-foot-bed pickups from the 2015 model year to April 1, 2018 part of the recall equation. FCA says it's not aware of any accidents or injuries because of the issue. The company plans to notify owners on June 28. The paperwork filed with the National Highway Traffic Safety Administration doesn't advise owners to stop driving the trucks, but nor does it instruct owners on how to address the problem in the meantime. Sounds like bungee cords might be the go. The fix is estimated to take 30 minutes at the dealer and entails removing the tailgate cover and installing a stop block to prevent the locking actuator's pivot arm from traveling too far. FCA says it will reimburse owners for any other repairs made to address the problem. Meanwhile, owners can contact Fiat Chrysler Automobiles customer service at 800-853-1403, and refer to FCA's number for this recall, V44. The NHTSA campaign number is 19V-347. Last year's recall comes under FCA number U74, and NHTSA campaign number 18V-486. Ram's not alone on this field. The NHTSA continues to investigate the 2017 Ford Super Duty pickups for a similar issue.

Fiat Chrysler and Renault pursue $35-billion merger to combat car industry upheaval

MILAN/PARIS — Fiat Chrysler pitched a finely balanced merger of equals to Renault on Monday to tackle the costs of far-reaching technological and regulatory changes by creating the world's third-biggest automaker. If it goes ahead, the $35 billion-plus tie-up would alter the landscape for rivals including General Motors and Peugeot maker PSA Group, which recently held inconclusive talks with Fiat Chrysler (FCA), and could spur more deals. Renault said it was studying the proposal from Italian-American FCA with interest, and considered it friendly. Shares in both companies jumped more than 10 percent as investors welcomed the prospect of an enlarged business capable of producing more than 8.7 million vehicles a year and aiming for 5 billion euros ($5.6 billion) in annual savings. It would rank third in the global auto industry behind Japan's Toyota and Germany's Volkswagen. But analysts also warned of big complications, including Renault's existing alliance with Nissan, the French state's role as Renault's largest shareholder and potential opposition from politicians and workers to any cutbacks. "The market will be careful with these synergy numbers as much has been promised before and there isn't a single merger of equals that has ever succeeded in autos," Evercore ISI analyst Arndt Ellinghorst said. With these sensitivities in mind, FCA proposed an all-share merger under a listed Dutch holding company. After a 2.5 billion euro dividend for existing FCA shareholders - giving a big upfront boost to the Agnelli family that controls 29% of FCA - investors in each firm would hold half of the new entity. The merged group would be chaired by Agnelli family scion John Elkann, sources familiar with the talks told Reuters, while Renault chairman Jean-Dominique Senard would likely become CEO. Italian Deputy Prime Minister Matteo Salvini said the proposed merger could be good news for Italy if it helped FCA to grow, but it was crucial to preserve jobs. He did not comment on the French government's 15% stake in Renault, but an influential lawmaker from the ruling League party said Rome may seek a stake in the combined group to balance France's holding. A deal could also have profound repercussions for Renault's 20-year-old alliance with Nissan, already weakened by the crisis surrounding the arrest and ouster of former chairman Carlos Ghosn late last year. The Japanese carmaker has yet to comment on FCA's proposal.

Chrysler Airflow Vision concept pairs today's platform with yesterday's name

Fiat-Chrysler has a number of notable announcements at this year's CES, including a formal announcement of its plug-in hybrid plans and branding, as well as the North American debut of the Fiat Centoventi concept. But it's also bringing something new and forward-looking to the show in the form of the slippery-looking Chrysler Airflow Vision concept. If that name sounds familiar to you, it's because the Airflow name was used on some streamlined and highly distinctive-looking Chrysler products of the 1930s. One thing both the old and new Airflows share is a slippery shape. The new Airflow is nothing but soft organic curves, looking like the automotive equivalent of Disney/Marvel robotic hero Baymax. It even has spats that cover the wheels, which are translucent to show off the big, copper-accented wheels underneath. While not unattractive, the modern Airflow does look a bit generic compared to the bold original, since so many modern EVs have a rounded rounded shape that's undoubtedly aerodynamic, but also unexciting. Maybe Chrysler should give it big hood strakes to evoke the stretched grille of the '30s Airflow. Peel away the pearly white exterior and you have a blend of future and contemporary technology. The interior shows off pedestal mounted seats swathed in suede and leather. The dashboard is minimalist and curvy like the exterior, and it features many screens as is the modern custom. In the center are dual displays for infotainment and climate controls like in an Audi. A small instrument screen sits ahead of the steering wheel, and the passenger gets a screen directly ahead of their seat. Chrysler says a unique feature will be the ability to swipe different menus and functions over to other occupants' screens so they can fiddle with things. Chrysler hasn't explicitly said what powers the Airflow Vision, but it makes mention of using the floor of the Pacifica Hybrid. It could share that van's powertrain, a hybrid V6 arrangement that might even preview the reported electrified all-wheel-drive version. We'll hopefully get more details on the powertrain after the reveal.