2014 Chrysler Town & Country Touring-l on 2040-cars

Auto blog

SRT Viper plant idled over slow sales [UPDATE]

The SRT Viper is taking an extended production break later this spring while the factory copes with low demand and gears up for the 2015 model year. Chrysler will idle the Conner Avenue Assembly Plant from April 14 to June 23, and 91 employees there will be laid off during that time. Sales have been slow so far this year, with just 91 Vipers sold in the first two months of 2014 (591 were sold all last year), according to The Detroit News. According to Chrysler, this is all part of the plan for the Viper. The automaker says that the Connor Avenue factory was meant to fluctuate in this way because it only builds one vehicle, and the sports coupe was never meant to be a mass-production vehicle. The company claims that idling the plant will allow it to manage showroom inventories. "Customer and dealer demand for the SRT Viper continues at expected levels," said Chrysler spokesperson Dianna Gutierrez to The Detroit News. SRT hasn't revealed what changes are planned for the 2015 model. This isn't the first time we've heard of the Viper's weak demand. As of October 2013, SRT had hoped to build around 2,000 examples, but only about 1,000 had been made. At that point, officials then revealed production would likely be scaled back. We've contacted the Chrysler for further information, and we'll update this post if and when we hear back. UPDATE: Chrysler has passed along this official statement regarding the plant idling: Chrysler Group confirms that its Conner Avenue Assembly Plant will be down, beginning the week of April 14. Production will resume the week of June 23. Ninety-one UAW-represented employees will be laid off during this time. The SRT Viper is a hand-crafted American exotic car that is designed for a specific consumer that values performance, style and exclusivity. It has never been intended to be a mass-production vehicle as less than 29,000 vehicles have been produced in the past 20 years. The ability to increase and decrease production at the Conner Avenue Assembly Plant allows the company to continue to meet our customers' desire to keep these special cars exclusive. We will be able to take advantage of this transition to manage dealer inventories.

Auto sales in March and first quarter down nearly across the board

Nearly every major automaker reported weak U.S. sales for March and the first quarter of 2019, citing a rough start to the year, but said a robust economy and strong labor market should encourage consumers to buy more vehicles as 2019 rolls on. GM, which no longer releases monthly sales figures, saw first-quarter sales fall 7 percent, with declines across all brands. Sales of Silverado pickup trucks fell nearly 16 percent and the high-margin Chevy Suburban large SUV dropped 25 percent. Ford also no longer releases monthly sales numbers, but is due to release its first-quarter sales figures on Thursday. According to industry data, Ford's sales fell 2 percent in the quarter and 5 percent in March. Ford representatives did not immediately respond to requests for comment. FCA reported a 7 percent fall in U.S. sales in March and a 3 percent drop for the first quarter. All of FCA's brands dropped in March, except for Ram, which saw a 15 percent increase in pickup truck sales. "The industry had a tough first quarter, but with spring finally starting to show its face and continued strong economic indicators ... we are confident that new vehicle sales demand will strengthen going forward," FCA's U.S. head of sales, Reid Bigland, said in a statement. Toyota reported a 3.5 percent fall in U.S. sales in March and 5 percent for the first quarter, hurt by declining demand for its Corolla sedans and Camry vehicles. "While some of our competitors are abandoning sedans, we remain optimistic about the future of the segment," Toyota said in a statement. Nissan posted a 5.3 percent drop in sales in March, and its first-quarter sales were down 11.6 percent. Honda and Hyundai bucked the trend. Honda's U.S. sales rose 4.3 percent in March and 2 percent in the quarter, while Hyundai's were up 1.7 percent and 2.1 percent, respectively. Passenger-car sales suffered throughout the January-March quarter compared with the same period in 2018 as Americans continued to abandon them in favor of larger, more comfortable pickup trucks and SUVs, which are far more profitable for automakers. The battle for market share in the particularly lucrative large-pickup truck market intensified in the quarter, as Fiat Chrysler Automobiles' Ram brand outsold the U.S.' No. 1 automaker General Motors' Chevrolet-brand trucks. The two automakers have both launched redesigned pickup trucks.

Stellantis announces ‘Circular Economy’ business to drive revenue, decarbonization

Stellantis has already announced its plans to reach net-zero carbon emissions by 2038. Today, the automaker has announced a new business unit to help it reach that goal while generating 2 billion euros per year in revenue by 2030. The “Circular Economy” business will help make revenue less dependent on finite, rare and ecologically problematic materials. The Circular Economy model features what Stellantis calls a “4R” strategy, comprising remanufacturing, repair, reuse and recycling. The goal is to make materials last as long as they can, reducing reliance on the acquisition of those precious new materials in the future by returning them to the business loop when theyÂ’ve reached the end of their first life. Through these processes, Stellantis says it can save up to 80% raw material and 50% energy compared to manufacturing a new part. Remanufacturing, or “reman” in Stellantis shorthand, means dismantling, cleaning and rebuilding parts to OEM spec. Nearly 12,000 remanufactured parts are available for customers to purchase. Some remanufacturing is done in-house, and some with partners and through joint ventures. Repair is pretty obvious — fixing parts to put back into vehicles. This also consists of reconditioning, to make a vehicle feel like new. Stellantis boasts 21 “e-repair” centers for repairing electric vehicle batteries.  Reuse refers to parts still in good condition from end-of-life vehicles sold as-is. Stellantis says it has 4.5 million multi-brand parts in inventory. These are sold in 155 countries through the B-Parts e-commerce platform. Reuse also refers second-life options, such as using batteries outside of automotive purposes. Recycling involves dismantling parts and scraps back into raw material form that is then looped back into the manufacturing process. Stellantis says it has collected 1 million parts for recycling in the past six months. Recycling doesnÂ’t get counted in that aforementioned 2 billion euros of revenue, but it does save the company money on acquisition of raw materials. As for batteries, specifically, Stellantis expects this recycling business to ramp up after 2030, when the packs currently in service begin to reach the end of their lifecycle. Stellantis will use its new “SUSTAINera” label to denote parts that are offered as part of its Circular Economy business.