2014 Chrysler Town & Country Touring on 2040-cars

Auto blog

The Chrysler Pacifica has clever 'Stow 'n Place' roof rack crossbars

While we focused yesterday on all the places you can store stuff (and especially bottles) inside the Toyota Sienna interior, today I thought I'd point out how another minivan makes it easier to store stuff up on the roof. The 2021 Chrysler Pacifica includes a clever integrated roof rack system dubbed "Stow 'N Place" that basically lets you store the cross bars on the van itself rather than somewhere in the garage. But wait, can't you always just leave crossbars on your car? Sure, if you want to live with extra wind noise and a fuel economy reduction. You see, the Pacifica stores them flush within a rail unit running length-wise with the roof. Basically, they're hidden away until you need them. The Subaru Outback has something similar to this, which we've previously reviewed. With its integrated crossbars, you just flip open a latch, fling the bar to the opposite side of the car and plug it in. Then repeat. It couldn't be simpler. Although the Chrysler system is more complicated, it does have a key advantage. Let's see how they work.  Chrysler tries to use chrome trim in order to create the visual illusion of raised roof rails from afar, but up close ... ... they clearly aren't. It's just a G.O.B.-grade illusion created by the chrome trim arching over black plastic trim.  You have to unscrew each end of the bars by turning these little pieces.  The bars are then completely detached from the van. You then have to articulate each of the bars so that they go from their straight, flush-mounted position to the necessary raised position. That's quite easy to do. Be careful, though as these suckers are sturdy metal. You don't want to drop one onto those fancy glass roof panels.  Subaru avoids all this and allows you to simply swing the bar across by utilizing a bulky rail housing that raises them up to the necessary height, but provides a visual that probably gives some car designers nightmares.   There are letters at each mounting point that align to those on a bar end. So, make sure to go A with A, D with D, etc.  However, you have two options for placing the C/D bar, meaning you're not stuck with a one-size-must-fit-all gap as with the Subaru. This is without question the advantage to Chrysler's approach here. So voila! What once didn't have crossbars now has them. It might not take seconds as with the Outback, but they're sure-as-hell quicker and easier to install than aftermarket crossbars.

China's Great Wall confirms its interest — in Jeep, or all of FCA

HONG KONG/SHANGHAI — Chinese automaker Great Wall Motor reiterated its interest in Fiat Chrysler Automobiles NV on Tuesday, but said it had not held talks or signed a deal with executives at the Italian-American automaker. China's largest sport utility vehicle manufacturer made a direct overture to Fiat Chrysler on Monday, with an official saying the company was interested in all or part of FCA, owner of the Jeep and Ram truck brands. Automotive News first reported the news, quoting Great Wall Motor President Wang Fengying as saying she planned to contact FCA to discuss acquiring the Jeep brand specifically. Those comments sent FCA shares higher but also raised questions over the ability of China's seventh-largest automaker by sales to buy larger Western rival FCA, or even Jeep, which some analysts value at as much as one-and-a-half times FCA. Great Wall sought to dampen speculation on Tuesday. It confirmed it had studied Fiat Chrysler, but said there was "no concrete progress so far" and "substantial uncertainty" over whether it would eventually bid. "The company has not built any relationship with the directors of FCA nor has the company entered into any discussion or signed any agreements with any officer of FCA so far," the company said in an English-language stock exchange filing. It did not give further detail. Fiat Chrysler stock dipped on the statement on Tuesday. Great Wall said trading in its Shanghai-listed shares would resume on Wednesday after having been suspended. Fiat Chrysler declined to comment on Great Wall's statement. On Monday, it said it had not been approached and was fully committed to implementing its current business plan. FLUSHING OUT RIVALS? Great Wall Motor, which was early to spot China's love of SUVs, had revenue of $14.8 billion last year and sold 1.07 million vehicles - but that compares with FCA's 2016 revenue of 111 billion euros ($130.6 billion). Analysts said Great Wall would need to raise both debt and equity to complete any deal, meaning its chairman Wei Jianjun could lose majority control. One possible scenario, according to analysts at Jefferies, would see Wei keeping a roughly 30 percent stake, while Great Wall would raise $10-$14 billion in debt and $10 billion in equity - hefty for a group currently worth just $16 billion. Ultimately, politics could be the clincher.

Junkyard Gem: 1990 Plymouth Laser RS Turbo

When Diamond Star Motors, a Chrysler-Mitsubishi joint venture, came online in the late 1980s, the first products to come out of the Normal, Illinois assembly plant were versions of the first-generation of the Mitsubishi Eclipse. There was the Eclipse itself, the Eagle Talon, and the Plymouth Laser. Here's a somewhat tattered example of the latter type, spotted in a Northern California self-serve yard. This car is unrelated to the Chrysler Laser of a few years earlier, which was based on the K-platform-derived Dodge Daytona. The Plymouth Laser was a pure Mitsubishi design. This one has the DOHC turbocharged 2.0-liter Sirius engine, rated at 190 horsepower. That was plenty of power by 1990 standards, a year in which the wildest possible Chevrolet Camaro (the IROC-Z, of course) packed just 230 hp under the hood. The IROC-Z weighed 3,149 pounds versus the Laser's 2,483, giving the Laser a slightly better power-to-weight ratio, not to mention a price tag more than $500 lower. CD players in cars were still uncommon in 1990; this Laser has the much more mainstream "computer controlled deck" cassette player, complete with nine-band graphic equalizer. Badging in futuristic typefaces was all the rage when this car was new. The all-wheel-drive Eclipse/Talon/Laser didn't hit dealerships until the 1991 model year, so all the '90s are front-wheel-drive only. The torque steer experienced in these cars could be exciting. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In the United States, Tina Turner pitched the Laser. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. North of the border, Celine Dion did the Laser's TV ads. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In Japan, the 1990 Eclipse featured "international breeze," whatever that is. Featured Gallery Junked 1990 Plymouth Laser RS Turbo View 23 Photos Auto News Chrysler Mitsubishi mitsubishi eclipse