2012 Chrysler Town & Country Touring on 2040-cars

Auto blog

Five automakers now being investigated by NHTSA for airbag woes

It appears that Toyota's renotification to owners of recalled vehicles from last year is just the tip of the iceberg for what could potentially be a much larger industry-wide recall. The National Highway Traffic Safety Administration is opening a preliminary evaluation investigation into roughly 1.1 million vehicles from Chrysler, Honda, Mazda, Nissan, Toyota and parts supplier Takata regarding faulty airbag inflators in several models.
NHTSA has received six reports - three directly, two from Takata and one from Toyota - of vehicles with ruptured airbag inflators from 2002-2006, which resulted in three injuries. So far, all six incidents have occurred in high humidity areas like Florida and Puerto Rico. According to Toyota's latest recall announcement, the inflators may have an improper propellant that could cause it to rupture in a crash and the bag to deploy abnormally.
This new investigation follows a previous recall from April 2013 of about 3.4 million vehicles worldwide for the airbag inflators from Takata. As Autoblog reported, Toyota jumpstarted the new situation when it found that the original list of serial numbers for the faulty part was incomplete and discovered more cars in need of replacement. Honda and Nissan told us that they were investigating whether further models would need called in again as well. Mazda told Autoblog: "Regarding the current Takata situation, we're working closely with NHTSA and investigating the situation, but nothing else to report at this time." Chrysler Group responded to us with the statement: "Chrysler Group engineers are conducting the appropriate analysis. The Company will cooperate fully with the National Highway Traffic Administration."

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

Chrysler 300 soldiers on for 2021 with pared-down range, higher price

Chrysler's last remaining sedan, the 300, will enter the 2021 model year with fewer trim levels and a higher price, according to a recent report. The 2021 model will be the second-generation 300's 10th year on the American market. Well-informed website CarsDirect received a dealer ordering guide, which reportedly confirms the Limited and 300C trims levels will not return for 2021. They're the two most expensive trims offered for 2020, and the publication added that removing them will likely mean upscale features like wood interior trim, Nappa leather upholstery, and quilted seats will no longer be available. It concluded the 2021 300 lineup will consist solely of the Touring and the 300S models, though it oddly made no mention of the Touring L. It doesn't sound like Chrysler will make any major visual or mechanical changes to the 300 — sorry, Hellcat fans. Available with rear- or all-wheel drive, the entry-level Touring model will be powered by the company's venerable 3.6-liter V6 tuned to make 292 horsepower and 260 pound-feet of torque. Marketed as a sportier sedan, the rear-wheel drive-only 300S will come standard with a 300-horse version of the V6, but buyers who want more power will be able to order a 5.7-liter Hemi V8 rated at 363 horsepower and 394 pound-feet of torque at extra cost. Pricing for the 2021 300 Touring will start at $31,940 including a $1,495 destination charge, a $405 increase over the 2020 model. Stepping up to the 300S will require spending $38,980, but the cost of the optional V8 will increase from $3,000 to $4,000, bringing its price to $42,890 once the aforementioned destination charge enters the equation. Keep in mind none of these figures are official, and Chrysler hasn't commented on the report. Most of the carmakers operating under the Fiat-Chrysler Automobiles (FCA) umbrella will announce the changes they're making for 2021 on September 1 — that's next Tuesday, so we won't have to wait long to find out what's in store for the 300. Chrysler has kept its lips sealed about what's next. Rumors claiming the sedan wouldn't live to see 2020 were evidently false, yet it can't remain in production for another decade. Sales fell by 37% to 29,213 units in 2019. Chrysler can either develop a third-generation model that will likely need to represent it in the sedan segment through the 2020s, or it can hike the path blazed by many of its rivals and throw in the towel.