2008 Chrysler Town & Country Lx, 3.3l V6, Cloth, Quad Seats, 3rd Row, on 2040-cars

Auto blog

Hellcat no help to Fiat-Chrysler's bottom-of-the-pile mpg average

What, you expected the "fastest muscle car ever" to help fleetwide fuel economy? Nope, don't think that's going to happen. That means Fiat Chrysler will likely to continue to languish at the bottom of the heap when it comes to fleetwide fuel economy among the largest automakers serving the US, especially as the automaker starts to sell its Dodge Challenger SRT Hellcat. A few hundred Fiat 500E electric vehicles aren't going to turn the trend around. See, Chrysler has once again finished at the bottom of the list when it came to fleetwide fuel economy among automakers for 2014 model-year vehicles, according to a preliminary study by the US Environmental Protection Agency. Chrysler and Fiat had an average of 21.1 miles per gallon. That substantially lagged the overall 24.2 mpg average, but it was an increase from the company's 20.9 mpg average last year and the 20.1 mpg average two years prior. For 2014, General Motors had the second-worst fleetwide fuel economy at an even 22 mpg. Fiat Chrysler does say it's working on improving its fuel economy, according to Automotive News. The company plans on making its inline-four-cylinder and V6 engines smaller, and will sell more vehicles with eight- and nine-speed transmissions. Heck, there's even a plug-in hybrid version of the Chrysler Town & Country minivan in the works for late 2015, and the company can tout fuel-efficiency gains with the Chrysler 200 and Jeep Cherokee. We would be remiss if we didn't note that, compared to its muscle-car forefathers, the Hellcat actually performs pretty well at the pump. Last month, word got out that the 2015 Challenger Hellcat, equipped either with a six-speed manual or an eight-speed automatic transmission, got a combined fuel economy of 16 mpg. Heck, the automatic-tranny version got 22 mpg on the highway. And that's for a car with 707 horsepower and a 10-second quarter-mile time. Still, with the pedal floored, the car can burn a gallon and a half of fuel per minute. Ouch.

Chrysler recalling 278,222 trucks and SUVs over bad rear axles

Chrysler has issued a recall of 278,222 light trucks and sport utility vehicles here in the United States. The reason: bad rear axles. Specifically, according to the National Highway Traffic Safety Administration, the rear axle pinion nut may lack a necessary adhesive patch, which could cause the nut to loosen. If this happens, the axle can lock up, which could cause all sorts of havoc on the road.
This is an expansion of the rear axle recall announced in October of last year, where 44,300 Ram 1500 and Dodge Dakota models were being called in. At that time, 12 accidents had been reported due to the faulty axle pinion nut.
Affected vehicles include Ram 1500 trucks from the 2009 to 2012 model years, Dodge Dakota models from the 2009 to 2011 model years, and both the Chrysler Aspen and Dodge Durango SUV twins, both from the 2009 model year only.

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.