2008 Chrysler Town & Country on 2040-cars

Auto blog

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Junkyard Gem: 2002 Chrysler PT Cruiser Dream Cruiser Series 1

It has become fashionable to hate the PT Cruiser these days, but Chrysler really hit a home run with the idea of a retro-looking, Neon-based vehicle that — legally speaking — qualified as a light truck according to American regulations and thus didn't need to comply with the costly fuel-economy and crash-safety rules applied to cars. PT Cruisers sold like crazy for the first half of the 2000s and even developed something of a cult followingÂ… but familiarity bred contempt once every parking lot and traffic jam in the country filled up with cute-looking retrowagons. I didn't start seeing many of these cars trucks in junkyards until about a decade ago, at which point the Chrysler section of every yard instantly became about 50% PT Cruisers. Most of the time, I ignore them as car-graveyard background noise, but the rare turbocharged Cruisers or those with manual transmissions can catch my eye, as well as those with weird body kits. The more interesting special-edition PT Cruisers also seem worth documenting as historically significant Junkyard Gems, and here's one of the rarest of all: a Dream Cruiser Series 1, found last summer in Colorado. Inspired by Detroit's Woodward Dream Cruise, the '02 Dream Cruiser Series 1 was the first of many special-edition PT Cruisers (if you're going to collect them all, you'll need to find a Pacific Coast Highway Edition, a Sunset Boulevard Edition, a Woodie Edition, and all the subsequent Dream Cruiser Series cars). All the Series 1 Dream Cruisers came in metallic Inca Gold paint, allegedly inspired by the paint on the 1998 Pronto Cruiser concept car. Chrysler planned to build 7,500 of these cars trucks, but I cannot verify actual production numbers. This is the first I've seen in a self-service wrecking yard, at any rate. The Dream Cruiser Series 1 got leather seats and interesting gold-trimmed interior surfaces. This one looks a bit rough inside, but we can assume it was glorious when new. Resale value on the PT Cruiser has cratered in recent years, so even a runner has little chance of evading the cold steel jaws of the crusher, once it starts to rust. Because every performance upgrade you can do with a Neon can also be done to a PT Cruiser, it would be possible to swap all the relevant mechanical bits from an SRT-4 Neon into a snazzy-looking Dream Cruiser and have the quickest PT Cruiser in your timezone. You should do this. This content is hosted by a third party. To view it, please update your privacy preferences.

FCA CEO Manley says alliances are still possible but aren't necessary

DETROIT — Fiat Chrysler Automobiles Chief Executive has a message for Renault SA and other would-be partners: We are happy to talk, but we can go it alone. "Strategically, we have a solid future and clear plans that are being invested in and are underway now," Mike Manley said during a session with reporters the day after the company released better than expected second-quarter results. "That isn't to say if there is a better future through an alliance or partnership or merger we wouldnÂ’t be open and interested to it." Fiat Chrysler is open to re-starting merger negotiations with French automaker Renault, Manley said, but added the French car maker is not the only potential partner to gain scale or plug gaps in Fiat Chrysler's technology or vehicle lineup. "To say are they the only opportunity, the answer to that question would be a definitive ‘No,Â’" Manley said. Fiat Chrysler in June withdrew a $35 billion merger proposal with Renault after French government officials intervened in the talks and sought to delay a decision on the deal. The Wall Street Journal reported on Friday that Renault and Nissan are trying again to reshape their alliance and resolve disagreements that helped to derail the merger talks with Fiat Chrysler. Fiat Chrysler has a commercial vehicle partnership with French rival Peugeot SA, and the two companies discussed a broader combination before Fiat Chrysler made its offer to Renault, people familiar with the situation have said. Manley said automakers are not the only potential partners. "There are cooperations that can help in specific technologies. There are cooperations as we think about the consumer-car interface," he said. "You could see collaborations that never would be there in the past." Fiat Chrysler's North American business is strong thanks to Ram trucks and Jeep SUVs, but in other markets the automaker faces continued challenges. The company is overhauling its mass-market business in Europe, which is anchored by the Fiat brand. Fiat Chrysler's Europe, Middle East and Africa operations were marginally profitable in the second quarter and achieved 1.8% profit margin in 2018. Manley has set a goal of 3% operating margins, well short of the 10% margins the company forecast for North America.