12 Chrysler Town & Country Touring Heated Leather Seats Remote Start Navigation on 2040-cars

Auto blog

A closer look at the 2015 Chrysler 200

When the doors of the Detroit Auto Show open to the public tomorrow, there's no doubt that the Chevy, BMW and Lexus booths will attract plenty of foot traffic with flashy sports cars. But when it comes to relevance as it relates to sales volume and in-market shoppers, the 2015 Chrysler 200 could end up being one of the more important introductions from the show. Positioned in the highly competitive midsize sedan segment, Chrysler has quite the challenge ahead of it, so we asked Andy Love, product chief of the 200, to give us a closer look at the new sedan to see how it will stack up against cars like the Toyota Camry, Ford Fusion and Honda Accord.
All of the pertinent information about the new 200 was revealed during the on-stage introduction, but Love gave us a first-hand look at the sedan's more intricate details. This includes some of the exterior design elements such as the wide use of LED exterior lighting and the strategic placement of the side marker lights, and even interior cues like electronic shifter, which allowed for extra storage space in the center console. Aside from the name, the 2015 200 started from scratch riding on a similar platform as the Dodge Dart and Jeep Cherokee, based on the Alfa Romeo Giulietta.
Scroll down to watch Love talk us through the 2015 Chrysler 200, and you can find more information about it at our original post from earlier in the week.

How to tune a car right: Part 3, tuning Mopar with OST Dyno

Not long ago, I wrote a story about a pony car tuned with a supercharger. The blower install had been done properly. Then the car's owner bolted on a set of great looking wheels wrapped in good looking but inexpensive rubber. On my first test drive, I couldn't get any of that supercharged sweetness to the ground. It was the perfect ride for parking in a Burger King parking lot on a Friday night. I tooled around on a Sunday drive, shaking my head that someone had spent five figures to get more power the right way, with a clean install, then wiped out the gains so thoroughly that the stock engine would likely have overwhelmed the tires. This got me thinking about the ways people ruin their quest for horsepower, either on the front end by not insisting on a clean install and paying the money for it, or on the back end with supplemental purchases like cheap tires or cheap gas. So I called three tuners, one focused on GM, one on Mopar, one on Ford, to find out what people should know about how to get the best power for their goals, and how to make sure they are able to use all that power. The first interview in this three-part series was with Blake Leonard at Top Speed Cincy in Cincinnati, Ohio, the second with Brandon Alsept at BA Motorsports in Milford, Ohio. This third and last interview is with Micah Doban at OST Dyno in Slippery Rock, Pennsylvania, a family business with more than 40 years of Mopar expertise specializing in Gen III Hemis, but tuning everything from land-speed cars and drag racers to Jeeps The interview has been edited for clarity and concision. Do people who come to OST generally know what they want? Probably 80% of the people who come in simply want more power with no particular ET goal [ET is a kind of bracket handicapped drag racing – ed.]. WhatÂ’s the best way to start a Mopar tune? The first thing is what people often skip, and that's to find a tuner or a shop. People will throw parts on their cars that the Internet said to, then go to a tuner who does things a different way, and [the tuner is] like ‘No we don't like to use these injectors, we don't like these parts.Â’ You have to find someone familiar with the parts that are on your car or that you're planning to put on your car. So having a goal and then finding a tuner who can help you with that goal is proper way to start. Exactly. And a lot of tuners have their own formula – and when I say tuner I mean someone that also does work to the cars.

U.S. automakers unite in opposition to possible Trump vehicle tariffs

WASHINGTON — The U.S. auto industry urged President Donald Trump's administration on Monday not to saddle imported cars and auto parts with steep tariffs, after the U.S. Commerce Department sent a confidential report to the White House late on Sunday with its recommendations for how to proceed. Some trade organizations also blasted the Commerce Department for keeping the details of its "Section 232" national security report shrouded in secrecy, which will make it much harder for the industry to react during the next 90 days Trump will have to review it. "Secrecy around the report only increases the uncertainty and concern across the industry created by the threat of tariffs," the Motor and Equipment Manufacturers Association said in a statement, adding that it was "alarmed and dismayed." "It is critical that our industry have the opportunity to review the recommendations and advise the White House on how proposed tariffs, if they are recommended, will put jobs at risk, impact consumers, and trigger a reduction in U.S. investments that could set us back decades." Representatives from the White House and the Commerce Department could not immediately be reached. The industry has warned that possible tariffs of up to 25 percent on millions of imported cars and parts would add thousands of dollars to vehicle costs and potentially devastate the U.S economy by slashing jobs. Administration officials have said tariff threats on autos are a way to win concessions from Japan and the EU. Last year, Trump agreed not to impose tariffs as long as talks with the two trading partners were proceeding in a productive manner. "We believe the imposition of higher import tariffs on automotive products under Section 232 and the likely retaliatory tariffs against U.S. auto exports would undermine - and not help - the economic and employment contributions that FCA, US, Ford Motor Company and General Motors make to the U.S. economy," said former Missouri Governor Matt Blunt, the president of the American Automotive Policy Council. Some Republican lawmakers have also said they share the industry's concerns. In a statement issued on Monday, Republican Congresswoman Jackie Walorski said she fears the Commerce Department's report could "set the stage for costly tariffs on cars and auto parts." "President Trump is right to seek a level playing field for American businesses and workers, but the best way to do that is with a scalpel, not an axe," she added.