Power Windows Locks Heated Seats Remote Start Navigation Bluetooth Ipod on 2040-cars

Auto blog

FCA's large, LX-based RWD cars will stick around until 2020

Fiat Chrysler Automobiles plans to stick with the Dodge Challenger, Dodge Charger, and Chrysler 300 until at least 2020, reports Automotive News. The information comes from two unnamed sources and was loosely confirmed by details in the automaker's new labor contract with Unifor, Canada's auto union. The plan, according to two anonymous sources, is to lightly refresh the Challenger, Charger, and 300 until the vehicles make the switch to FCA's new Giorgio platform. The refresh, as Automotive News points out, will happen in 2018. The Giorgio platform currently underpins the Alfa Romeo Giulia and is expected to find its way to two of the three large American vehicles for the 2021 model year. At that time, FCA will discontinue either the Charger or the 300, claim AN's unnamed sources. If one of the vehicles were to go, it would most likely be the 300. The 300's LX platform would be approximately 15 years old in 2020 and the vehicle doesn't draw in as many sales as the Challenger or the Charger. The Charger made the switch from the LX platform in 2010 with the current model utilizing the mildly updated LD platform, while the Challenger recently moved from the LC platform to the LA platform last year. All of those rear-wheel-drive platforms are closely related. Automotive News points out that FCA CEO Sergio Marchionne stated that the new platform could be utilized across various applications in a conference call with analysts last month. The plan, according to the report, is to stretch and widen the Giorgio platform for the next-gen Challenger and Charger. The new platform is also rigid enough to allow the automaker to add a convertible to its lineup, which could lend further credence to rumors of an upcoming Barracuda. Hopefully, the move to the new Giorgio platform doesn't delay the all-wheel-drive Challenger GT AWD or the wide-body, Hellcat-powered Challenger ADR. We'll just have to wait and see. Related Video: News Source: Automotive News - sub. req. Chrysler Dodge Coupe Performance Sedan FCA fiat chrysler automobiles

This or That: 2005 Chrysler Crossfire SRT6 vs. 1984 Pontiac Fiero

Welcome to another round of This or That, where two Autoblog editors pick a topic, pick a side and pull no punches. Last round pitted yours truly against Associate Editor Brandon Turkus, and my chosen VW Vanagon Syncro narrowly defeated Brandon's 1987 Land Rover. In fact, it was, by far, the closest round we've seen, with 1,907 voters seeing things my way (for 50.8 percent of the vote) versus 1,848 votes for Brandon's Rover (49.2 percent). Sweet, sweet victory! For this latest round of This or That, I've roped Editor Greg Migliore into what I think is a rather fun debate. We've each chosen our favorite terrible cars, setting a price limit of $10,000 to make sure neither of us went too crazy with our automotive atrocities. I think we've both chosen terribly... and I mean that in the best way possible. 2005 Chrysler Crossfire SRT6 Jeremy Korzeniewski: Why It's Terrible: Taken in isolation, the Chrysler Crossfire isn't necessarily a terrible car. In fact, it drives pretty darn well, and there's a lot of solid engineering under its slinky shape. Problem is, that engineering was already rather long in the tooth well before Chrysler ever got its hands on it, having come from Mercedes-Benz, which used the basic chassis and drivetrain in a previous version of its SLK coupe and roadster. Granted, the SLK was an okay car, too, but even when new, it hardly set the world on fire with sporty driving dynamics. Chrysler took these decent-but-no-more bits and pieces from the Mercedes parts bin – remember, this car was conceived in the disastrous Merger Of Equals days – and covered them with a rather attractive hard-candy shell. Unfortunately, the super sporty shape wrote checks in the minds of buyers that its well-worn mechanicals were simply unable to cash, though an injection of power courtesy of a supercharged V6 engine in the SRT6 model, as seen here, certainly helped ease some of those woes. In the end, Chrysler was left with a so-called halo car that looked the part but never quite performed the part. It was almost universally panned by critics as an overpriced parts-bin special, which, I must add, was damningly accurate. As a result, sales were very slow, and within the first few months, dealers were clearancing the car at cut-rate prices, just to keep them from taking up too much of the showroom floor. Why It's Not That Terrible, After All: I can speak from personal experience when discussing the Chrysler Crossfire. You see, I owned one. Well, sort of...

Stellantis mega-merger gets approval from FCA, PSA shareholders

MILAN — Shareholders of Fiat Chrysler and PSA Peugeot decisively voted Monday to merge the U.S.-Italian and French carmakers to create worldÂ’s 4th-largest auto company. Addressing separate meetings, both PSA Peugeot CEO Carlos Tavares and Fiat Chrysler Chairman John Elkann spoke of the “historic” importance of the vote, which combines legacy car companies that helped write the industrial histories of the United States, France and Italy. Before the merger is finalized, shares in the new company, to be called Stellantis, must the launched. It will be traded in Milan, New York and Paris. The marriage of PSA Peugeot and Fiat Chrysler Automobiles is built on the promise of cost-savings in the capital-hungry industry, but what remains to be seen is if it will be able to preserve jobs and heritage brands in a global market still suffering from the pandemic. The deal will create the worldÂ’s fourth-largest carmaker, with the capacity to produce 8.7 million cars a year, behind Volkswagen, Toyota and Renault-Nissan, and create 5 billion euros in annual synergies.  “We are fully aware of the fact that together we will be stronger than individually,'' PSA CEO Carlos Tavares told a virtual gathering of eligible shareholders. “The two companies are in good health. These two companies have strong positions in their markets.” The new company will put together under one roof French mass-market carmakers Peugeot and Citroen, top-selling Jeep and Italian luxury and sports brands Maserati and Alfa Romeo - pooling companies that have helped define the industry in the United States, France and Italy. While the tie-up is billed as a merger of equals, the power advantage goes to PSA, with Tavares running Stellantis and holding the tie-breaking vote on the 11-seat board. Tavares is set to take full control of the company early this year, possibly by the end of January. Fiat Chrysler chairman John Elkann, heir to the Fiat-founding Agnelli family and Fiat ChryslerÂ’s biggest shareholder, will be the Stellantis chairman. Fiat Chrysler CEO Mike Manley will head North American operations, which is key to Tavares' long-time goal of getting a U.S. foothold for the French carmaker he has run since 2014, and the clear money-maker for Fiat Chrysler. Such a deal was long wanted by Fiat ChryslerÂ’s long-time CEO Sergio Marchionne, who had predicted the necessity of consolidation in the industry. He was unable to find a deal before his sudden death in July 2018.