2004 Chrysler Sebring Covertible Lx 2.7 Liter 6cylinder With Airconditioning on 2040-cars

Auto blog

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

FCA CEO Mike Manley will take undefined new role after PSA merger

MILAN — Fiat Chrysler Chief Executive Mike Manley will remain with the new group set to result from a planned merger with French rival PSA-Peugeot, Chairman John Elkann said on Wednesday. In a letter to Fiat Chrysler (FCA) employees on the day the two companies announced a binding agreement for a $50 billion tie-up to create the world's fourth-largest carmaker, Elkann said he was "delighted" that the combined group would be led by current PSA CEO Carlos Tavares. "And Mike Manley, who has led FCA with huge energy, commitment and success over the past year, will be there alongside him," he said. He did not say what position Manley would hold. Elkann — who will chair the new group — said there was still much to be done to complete the merger. "Over the coming months we must work tirelessly and determinedly to fulfill all the approval requirements needed to finalize the commitment we have signed," he said. Related Video:     Hirings/Firings/Layoffs Chrysler Dodge Fiat Jeep RAM Citroen Peugeot FCA PSA merger Mike Manley carlos tavares

Junkyard Gem: 1989 Chrysler TC by Maserati

Lee Iacocca's friendship with Alejandro de Tomaso went way back, and it led to the Ford-powered De Tomaso Pantera being born in 1971 (when Iacocca was running Ford). After Iacocca moved over to head Chrysler in 1978, he began working with de Tomaso (who owned Maserati by that point) to develop a sports coupe based on the Chrysler-salvation K-Car platform. It took quite a while, but eventually that car became reality: the Chrysler TC by Maserati (officially known as Chrysler's TC by Maserati). Some 7,300 were built through 1991, and I've found one of them in a Denver-area car graveyard. I've managed to document four of these cars in their final parking spots prior to this one, in wrecking yards in Colorado, California, and Wisconsin. The Chrysler's TC by Maserati does have a devoted following, but they can't save 'em all. The TC really was assembled by Maserati in Italy, but the underlying chassis was taken from the Dodge Daytona. The body bore a strong resemblance to that of the Chrysler LeBaron GTC, which was unfortunate considering the price difference between the two cars: the MSRP on the 1989 TC was $33,000, while the LeBaron GTC cost $17,435 (that's about $80,880 and $42,730 in 2022 dollars). The TC had three different engines driving the front wheels over its short lifetime: two varieties of turbocharged Chrysler 2.2 four-cylinder (one with 160 horsepower and one with a Cosworth cylinder head with 200 horsepower) and that good old workhorse of a Mitsubishi V6: the 6G72, with 141 horses. This car has the 160hp 2.2. The Cosworth-headed cars (500 were built) got a five-speed manual transmission, but the other 6,800 TCs got a Chrysler slushbox of either three or four speeds (this one is a three-speed). There was a lot of snobbish disapproval of the TC by the automotive press, but just look at that interior! Even the most over-the-top LeBaron never got this level of swank inside.  Every time I write about one of these cars, I hear that the factory hardtop roof is worth fantastic money… but four out of the five examples I've found in junkyards had the hardtop, and I think every single one went to the crusher with its car. How many miles? Not many! Maybe the speedometer cable broke in 1995. The radio and HVAC controls are straight LeBaron, but the wood and leather are the real thing.