2024 Chrysler Pacifica Touring L Braunability Power Xt Foldout Wheelchair Van on 2040-cars

Auto blog

What we think we know about Chrysler's plug-in hybrid minivan, CUV

When the 2016 Town & Country comes to Chrysler dealerships, it will sport something no production minivan has ever had: a plug. That was on bit of news hidden in the massive Fiat Chrysler (FCA) product preview held in Detroit on Tuesday. All FCA would say about the minivan was that the Town & Country PHEV would get 75 MPGe. We know from the product preview slide (click to enlarge) that there are actually two plug-in hybrids coming from FCA. The minivan and a "full-size crossover," due in 2017. While that could describe the next-gen Dodge Journey, it could also be a brand new peoplemover. All FCA said officially was that it will be a "new vehicle or renewal of existing nameplate," which seems like an awful broad definition. We were curious to know more about these products, so we asked FCA spokesman Eric Mayne. Sadly, he was less than forthcoming, telling AutoblogGreen, "I can only refer you back to the presentations in which the PHEV is mentioned. If the answers aren't there, you'll have to wait." There are actually two plug-in hybrids coming from FCA. Well, sure, for actual facts we'll have to wait, but we can still speculate and look into the archives to see what plug-in vehicle technology FCA has offered in the past. Chrysler had an electric vehicle working group called ENVI that created products like an all-electric minivan for the US Postal Service (pictured). ENVI was disbanded in 2009. At the time, the company said plug-in vehicle work would continue, and since then we saw PHEV minivan and PHEV truck test programs from Chrysler and Ram. In early 2012, Chrysler started testing a small, 25-unit fleet of plug-in hybrid-electric Town & Country minivans with the city of Auburn Hills, MI, where the company is located. The $26-million demonstration project was funded in part by the US Department of Energy, which covered $10 million. The stated plan was for those minivans to each hit at least 16,800 miles over two years, but there were hiccups. In September 2012, for example, the liquid-cooled 12.1-kWh batteries from were found to overheat. Those batteries came from Electrovaya and were mated to a 3.6-liter Pentastar engine that could burn E85. Will any of this make it into the production Town & Country PHEV? No idea, but now we know where the company's coming from. FCA also has some EV experience with the Fiat 500e. Chrysler says electrification has been over-blown by the media.

The Plymouth Prowler was so cool you could get a Prowler-shaped trailer for it

Like many car enthusiasts, we at Autoblog have a tendency to spend our free time browsing online car listings for unusual vehicles. One of our editors' latest finds is this 1997 Plymouth Prowler with less than 300 miles on the clock. And as we looked at it and discussed it in our work chat room, we were reminded just how cool the Prowler was. It was one of the rare automobiles to go from concept to reality almost unchanged. It was even more remarkable Chrysler pulled it off considering its open wheels, aluminum chassis and dramatic body work. The 1997 model year was the very first for the Prowler, and it was only offered in the metallic purple that the show car wore. That show car made its debut in Detroit in 1993. You can see it in the photo above. Besides some tweaked bumpers and reworked headlights, they're hard to tell apart. The Prowler, inspired by hot rods like custom 1932 Fords, helped kick off the retro craze of the late 1990s and early 2000s, leading to Chrysler's own PT Cruiser and other vehicles such as the VW New Beetle, BMW-built Mini Cooper and Ford Thunderbird. The production car boasted some impressive technology, but it also had a number of drawbacks. It featured an aluminum chassis, and it had a rear-mounted transmission connected to the engine via a torque tube similar to the contemporary C5 Corvette. On the flip side, this hot rod-inspired roadster ended up with a 3.5-liter V6 making 214 horsepower, rather than a rumbly V8. This was because there wasn't room in the narrow nose for a V8. It was also saddled with a four-speed automatic, the only available transmission. The interior, while having cool hot rod touches like the body-color instrument panel, AutoMeter tachometer on the steering column and stylish hoops on the seats, was plasticky and sourced heavily from the Chrysler parts bin. These were issues on a car that cost the equivalent of nearly $60,000 in today's money. Chrysler did make efforts to improve the Prowler over time. The most significant improvement was the introduction of a high-output V6 for 1999 making 253 horsepower, which actually resulted in acceleration appropriate for a performance car at the time. Then again, it still had that four-speed automatic. Plymouth also offered the car in a variety of colors and some special editions with two-tone paint. The one sad thing about the Prowler is that Chrysler recognized some of the shortcomings of the car, and it even built a show car that fixed the issues.

FCA registers 'Cuda' trademark, but we wouldn't get our hopes up

It seems Chrysler has submitted a trademark with the US Patent and Trademark Office for the name "Cuda," as first reported by Motor1. Fans of Mopar will instantly recognize this as the abbreviated name of Plymouth's classic Barracuda muscle car, which occasionally bared the shortened nomenclature. Though this might seem like a sign that FCA is considering a revival of the beloved machine, we wouldn't get our hopes up. See, rumors of a 'Cuda or Barracuda revival have circulated pretty much since the moment Dodge showed the modern Challenger and when it went on sale. And some of those rumors have involved the re-registering of the 'Cuda trademark, even as far back as 2010. Over the years, each rumor died a quiet death as time went on and no 'Cudas appeared on dealer lots. There is one rumor that's recent enough to still have a slim chance of realization, circa 2015 to be exact. It predicts a smaller Challenger-based car called Barracuda that could appear as a Dodge in both coupe and drop-top versions. However, we doubt it will come true, since FCA doesn't exactly have a large development budget, and we're not sure what the company would have to gain by making another sports car to sell below the Challenger. Odds are, it would cannibalize sales from the older, completely developed, and thus more profitable Challenger. Really, this trademark filing is probably just a defensive move for Chrysler. It will ensure that no one else can slip in and snag the name for their own vehicle. It should also help ensure that Chrysler has the rights to use the name on other products such as memorabilia. Sorry to crush your dreams. Related Video: News Source: US Patent and Trademark Office via Motor1Image Credit: Chrysler Rumormill Chrysler Dodge Coupe Performance hemi cuda