2004 Chrysler Pacifica Base Sport Utility 4-door 3.5l on 2040-cars

Auto blog

SRT Viper plant idled over slow sales [UPDATE]

The SRT Viper is taking an extended production break later this spring while the factory copes with low demand and gears up for the 2015 model year. Chrysler will idle the Conner Avenue Assembly Plant from April 14 to June 23, and 91 employees there will be laid off during that time. Sales have been slow so far this year, with just 91 Vipers sold in the first two months of 2014 (591 were sold all last year), according to The Detroit News. According to Chrysler, this is all part of the plan for the Viper. The automaker says that the Connor Avenue factory was meant to fluctuate in this way because it only builds one vehicle, and the sports coupe was never meant to be a mass-production vehicle. The company claims that idling the plant will allow it to manage showroom inventories. "Customer and dealer demand for the SRT Viper continues at expected levels," said Chrysler spokesperson Dianna Gutierrez to The Detroit News. SRT hasn't revealed what changes are planned for the 2015 model. This isn't the first time we've heard of the Viper's weak demand. As of October 2013, SRT had hoped to build around 2,000 examples, but only about 1,000 had been made. At that point, officials then revealed production would likely be scaled back. We've contacted the Chrysler for further information, and we'll update this post if and when we hear back. UPDATE: Chrysler has passed along this official statement regarding the plant idling: Chrysler Group confirms that its Conner Avenue Assembly Plant will be down, beginning the week of April 14. Production will resume the week of June 23. Ninety-one UAW-represented employees will be laid off during this time. The SRT Viper is a hand-crafted American exotic car that is designed for a specific consumer that values performance, style and exclusivity. It has never been intended to be a mass-production vehicle as less than 29,000 vehicles have been produced in the past 20 years. The ability to increase and decrease production at the Conner Avenue Assembly Plant allows the company to continue to meet our customers' desire to keep these special cars exclusive. We will be able to take advantage of this transition to manage dealer inventories.

Junkyard Gem: 1989 Chrysler TC by Maserati

Lee Iacocca's friendship with Alejandro de Tomaso went way back, and it led to the Ford-powered De Tomaso Pantera being born in 1971 (when Iacocca was running Ford). After Iacocca moved over to head Chrysler in 1978, he began working with de Tomaso (who owned Maserati by that point) to develop a sports coupe based on the Chrysler-salvation K-Car platform. It took quite a while, but eventually that car became reality: the Chrysler TC by Maserati (officially known as Chrysler's TC by Maserati). Some 7,300 were built through 1991, and I've found one of them in a Denver-area car graveyard. I've managed to document four of these cars in their final parking spots prior to this one, in wrecking yards in Colorado, California, and Wisconsin. The Chrysler's TC by Maserati does have a devoted following, but they can't save 'em all. The TC really was assembled by Maserati in Italy, but the underlying chassis was taken from the Dodge Daytona. The body bore a strong resemblance to that of the Chrysler LeBaron GTC, which was unfortunate considering the price difference between the two cars: the MSRP on the 1989 TC was $33,000, while the LeBaron GTC cost $17,435 (that's about $80,880 and $42,730 in 2022 dollars). The TC had three different engines driving the front wheels over its short lifetime: two varieties of turbocharged Chrysler 2.2 four-cylinder (one with 160 horsepower and one with a Cosworth cylinder head with 200 horsepower) and that good old workhorse of a Mitsubishi V6: the 6G72, with 141 horses. This car has the 160hp 2.2. The Cosworth-headed cars (500 were built) got a five-speed manual transmission, but the other 6,800 TCs got a Chrysler slushbox of either three or four speeds (this one is a three-speed). There was a lot of snobbish disapproval of the TC by the automotive press, but just look at that interior! Even the most over-the-top LeBaron never got this level of swank inside.  Every time I write about one of these cars, I hear that the factory hardtop roof is worth fantastic money… but four out of the five examples I've found in junkyards had the hardtop, and I think every single one went to the crusher with its car. How many miles? Not many! Maybe the speedometer cable broke in 1995. The radio and HVAC controls are straight LeBaron, but the wood and leather are the real thing.

Marchionne completed Fiat-Chrysler deal from a Florida beach

Sergio Marchionne is the CEO of Fiat, which as you may have heard, has finally worked up a deal to finish acquiring the Chrysler Group after months of bargaining with the United Auto Workers and its VEBA healthcare trust, which owned just over 40 percent of the American brand. Where was Marchionne when the deal was finally hammered out? Well, not tucked away in a frigid Detroit board room until the wee hours of the morning.
Nope, one of the largest deals in automotive history was reportedly hammered out on the beach - at the home of a banker, in the Florida resort town of Vero Beach. Marchionne traveled to the home of Alain Lebec, a senior managing director at Brock Capital LLC, one of the advisory companies for the VEBA fund, where both sides met to make final arrangements in the $4.35-billion exchange. The location of the final deal, though, is nearly as remarkable as the pace with which it came about.
According to anonymous sources pinned down by Automotive News Europe, before the meeting, the two sides were meeting in Detroit as recently as December 19, which is where Fiat made one of its final revised offers. Naturally, the VEBA made a counter offer, which led Marchionne to initiate the Vero Beach meeting.