4dr Wgn 2.4l Cd 4 Cylinder Engine A/c Adjustable Steering Wheel on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Big Black Friday discounts key to Chrysler 200 sales success

A lot of people go shopping for deals on TVs or computers around the holiday season, but it looks like some folks are finding some fantastic deals on cars too. Take the Chrysler 200 for example. The new sedan had a great November in terms of sales, and by Chrysler's numbers, it delivered 14,317 of them for the month, a 155 percent increase from the same month last year. It even beat the November 2013 sales of the old 200 and Dodge Avenger combined. However, a report from Daily Kanban based on TrueCar data suggests that the good month came at least in part from steep incentives. Based on 20,156 sales of the 200 from TrueCar's database, average transaction prices were about $2,500 to $4,000 under MSRP for all but the base LX front-wheel drive model. That one actually went for about $68 above the typical base price. Going by these numbers, most people could have bought nearly any trim cheaper than the listed price of the one above it. For example, the top C AWD averaged $27,423, less money than the stated MSRP of the lower-spec S AWD. TrueCar's website also shows 200 pricing dipping in the latter part of November and into early December. There's no doubt that the 200 had a stellar month for November. But these figures suggest that it might have come partially because buyers found stacks of money on 200 hoods, while out doing some holiday shopping. Related Video:

Fiat Chrysler may build an AWD Pacifica minivan

Fiat Chrysler is reportedly considering building an all-wheel-drive variant of the Chrysler Pacifica as a salve for the minivan's flagging sales, especially in Canada, where it's built, and where the Dodge Grand Caravan is eating its lunch. Automotive News cites a ranking official with Unifor, Canada's autoworker union, and two anonymous sources familiar with the company's internal machinations. In addition, the outlet cites the CEO of AutoForecast Solutions, a consulting firm, who says his industry data show that FCA will begin production of an AWD Pacifica in the second quarter of 2020 at its plant in Windsor, Ontario. "It's going to help them with their leadership of the product," it quoted CEO Joe McCabe as saying. An FCA spokeswoman told Autoblog the company doesn't comment on speculation about future products. Pacifica sales have held relatively steady in the U.S. Full-year 2018 sales were a respectable 118,322, essentially flat with 2017, compared to 151,927 Grand Caravans, an increase of 21 percent. Sales through February of this year were down by 24 and 27 percent, respectively, but FCA says its share of the overall U.S. minivan market has nevertheless risen to 57.7 percent. But cross the Detroit River into Canada, FCA's second-largest market for minivans, and things don't look as rosy for the company's flagship minivan. There, the Grand Caravan in 2018 outsold the Pacifica by a 5-to-1 ratio, 32,253 to 5,999, which represented respective declines of 31 percent and 3 percent. Things haven't gotten any better in 2019, either, with Pacifica sales falling 55 percent through the first two months to 512 and Grand Caravan sales slipping 20 percent to 4,836. FCA's share of the Canadian minivan market was 59 percent at the end of 2018, the company says. Canada is known as the Great White North, after all, so it makes perfect sense that all-wheel drive is a popular sell there as a way to navigate the long, snowy winters. But there are questions about whether adding a rear driveshaft would affect the Pacifica's Stow 'n Go system, which allows users to fold the third-row seats into the floor to add cargo space. Chrysler in fact offered all-wheel drive versions of its minivans through 2004, when it first introduced the Stow 'n Go, AN reports.