2002 Chrysler Pt Cruiser Touring Edition**64k Miles**1 Owner**california Car**** on 2040-cars

Auto blog

How to tune a car right: Part 3, tuning Mopar with OST Dyno

Not long ago, I wrote a story about a pony car tuned with a supercharger. The blower install had been done properly. Then the car's owner bolted on a set of great looking wheels wrapped in good looking but inexpensive rubber. On my first test drive, I couldn't get any of that supercharged sweetness to the ground. It was the perfect ride for parking in a Burger King parking lot on a Friday night. I tooled around on a Sunday drive, shaking my head that someone had spent five figures to get more power the right way, with a clean install, then wiped out the gains so thoroughly that the stock engine would likely have overwhelmed the tires. This got me thinking about the ways people ruin their quest for horsepower, either on the front end by not insisting on a clean install and paying the money for it, or on the back end with supplemental purchases like cheap tires or cheap gas. So I called three tuners, one focused on GM, one on Mopar, one on Ford, to find out what people should know about how to get the best power for their goals, and how to make sure they are able to use all that power. The first interview in this three-part series was with Blake Leonard at Top Speed Cincy in Cincinnati, Ohio, the second with Brandon Alsept at BA Motorsports in Milford, Ohio. This third and last interview is with Micah Doban at OST Dyno in Slippery Rock, Pennsylvania, a family business with more than 40 years of Mopar expertise specializing in Gen III Hemis, but tuning everything from land-speed cars and drag racers to Jeeps The interview has been edited for clarity and concision. Do people who come to OST generally know what they want? Probably 80% of the people who come in simply want more power with no particular ET goal [ET is a kind of bracket handicapped drag racing – ed.]. WhatÂ’s the best way to start a Mopar tune? The first thing is what people often skip, and that's to find a tuner or a shop. People will throw parts on their cars that the Internet said to, then go to a tuner who does things a different way, and [the tuner is] like ‘No we don't like to use these injectors, we don't like these parts.Â’ You have to find someone familiar with the parts that are on your car or that you're planning to put on your car. So having a goal and then finding a tuner who can help you with that goal is proper way to start. Exactly. And a lot of tuners have their own formula – and when I say tuner I mean someone that also does work to the cars.

Chrysler Airflow EV crossover concept headed to production in 2024

At the 2020 Consumer Electronics Show (CES), the Airflow Vision Concept took the starring role on the Chrysler stand. More than a year later, Stellantis used its EV Day to show what looked like a running, rolling evolution of the Airflow Vision Concept, but the automaker didn't reference any names for the product. Finally, at one point during the company's Software Day this week, the company brought the production-looking battery-electric crossover out once again, only this time it has a name: Chrysler Airflow. The Stellantis roadmap contains blank spots in the 2022 and 2023 new reveal columns for the Chrysler brand. Car and Driver believes the Airflow could be one of Chrysler's new debuts in 2024. The automaker hasn't offered any details, so the most that can be done with the Airflow is to examine the pieces that Stellantis had already spoken of and see which ones fit. The OEM filed a trademark application for the Airflow name in 2019 and 2021. C/D thinks the five-seat production vehicle will ride on STLA Medium platform and be about the size of the Ford Mustang Mach-E and Volkswagen ID.4. The STLA Medium architecture will serve premium offerings for the C and D segments, will fit battery backs between 87 kWh and 104 kWh and two sizes of e-motors — a smaller motor producing from 168 to 242 horsepower, and a bigger motor putting out anywhere from 201 to 443 hp. Maximum range could be as much as 440 miles, depending on battery and motor combination. The platform slots between the STLA Small and STLA Large, a fourth STLA Frame platform serving trucks and vans.  Just before a four-minute video segment that showed Stellantis CEO Carlos Tavares driving the Airflow, the automaker's head of software said, "It's closer than you think and more than a pure concept." The video shows a range of screens lining the instrument panel, plus a couple more in the back, as well as what look like plush materials and the obligatory panoramic sunroof. With the company aiming to hit 20 billion euros ($22.7B U.S.) in revenue from software by 2030, it said, "The Chrysler Airflow Concept shown in the Stellantis Software Day presentation represents the future of connected vehicles." The first we'll see of that could be the three new software platforms planned to roll out in 2024, all of them powered by AI. CES 2022 isn't far off, and Stellantis has told us there's a big announcement for 2022.

Government Ending Jeep Investigation

The government is closing its investigation into older-model Jeeps with fuel tanks that could rupture and cause fires. The National Highway Traffic Safety Administration said Friday it has "no reservations" with Chrysler Group's plans to recall the vehicles. The agency is expected to release a report on its investigation in a few weeks. The decision ends an unusually public struggle between Chrysler and NHTSA. The agency asked Chrysler to recall 2.7 million Jeeps last June, contending that their gas tanks - which are positioned behind the rear axle - were at risk of rupturing and catching fire in rear-end crashes. Involved were Grand Cherokee SUVs from the 1993 to 2004 model years and Liberty SUVs from 2002 to 2007. Chrysler initially refused to recall the vehicles. The company said the rate of fuel leaks and fires after crashes was similar to comparable vehicles that were sold during the time in question. It was the first time in two years that an automaker had refused NHTSA's request for a recall. Chrysler later agreed to recall 1.56 million of the Jeeps and install trailer hitches on them to help protect the gas tanks. The company sent notices to the remaining customers saying their vehicles were fine if they have factory-installed or Chrysler-made trailer hitches. NHTSA said late Friday that it has been in close contact with Chrysler and will monitor the recall as it continues. Chrysler has told customers that it will start installing the hitches soon. "Consumers should have their vehicles serviced promptly once they receive final notification from Chrysler,"NHTSA said in a statement. In its own statement Friday, Chrysler said, "We share NHTSA's commitment to safety." NHTSA's outgoing chief, David Strickland, told The Associated Press in an interview last month that Chrysler had convinced NHTSA that the Jeeps were no more dangerous than similar vehicles sold at that time. "Those vehicles performed at a rate similar to their peers. That is the keystone analysis as to whether something poses an unreasonable risk to safety," Strickland said. Friday was Strickland's last day at NHTSA. He is joining Venable, a law firm. NHTSA began investigating the Jeeps at the request of the Center for Auto Safety, a Washington-based advocacy group. "It is tragic that NHTSA approved Chrysler's sham trailer hitch recall for Jeeps that explode in rear impacts," the Center for Auto Safety's director, Clarence Ditlow, said Friday.