2002 Chrysler Pt Cruiser Limited on 2040-cars

Auto blog

Bob Lutz, UAW rep commend Chrysler for not bowing to NHTSA recall pressure [w/poll]

Bob Lutz, the well-known executive with a range of automakers including both General Motors and Chrysler, says he supports Chrysler for not caving under federal pressure to issue a recall on 2.7 million Jeep vehicles. The National Highway Traffic Safety Administration is arguing that the plastic fuel tanks positioned behind the axles of certain 1993-2004 Grand Cherokee models and 2002-2007 Liberty models may become punctured in a collision and potentially catch fire, so it has called upon Chrysler to recall the vehicles. 15 deaths and 46 injuries have been attributed to the issue. For its part, Chrysler has maintained that its models "met and exceeded" all safety applicable mandates when they were manufactured, and furthermore, they argue that the government agency's own data proves that the vehicles are no more dangerous than similar SUVs produced by other automakers at the time. As a result, it is taking the unusual step of refusing to recall the vehicles.
According to The Detroit News, Lutz says Chrysler is right to push back when the government is out of line. Lutz also said that he wished he could have done the same when NHTSA urged Chrysler to issue a recall on certain minivans back when he was with the automaker 25 years ago.
Meanwhile, United Auto Workers Vice President General Holiefield also defended Chrysler by saying, "Our legendary Jeeps are crafted with pride by our dedicated UAW American workforce who work tirelessly to ensure the utmost quality of each Jeep that is produced for customers."

Junkyard Gem: 1964 Plymouth Valiant V-200 Wagon

When Chrysler introduced the Valiant for the 1960 model year, the automotive world had no idea that this new compact would become one of the most successful products in the company's history. Valiants and its A-Body siblings were built and sold by the millions around the world, with production continuing into the early 1980s (in Australia and South America). The sales pinnacle for the Valiant in the U.S. was 1964, and today's Junkyard Gem is one of those cars: an upscale V-200 station wagon, found in a Denver-area wrecking yard a few weeks back. The Valiant began life as its own marque, became a Plymouth for 1961, left Plymouth for 1962, then returned as a Plymouth model until American Valiant production ceased in 1976, and the Volare took its place. You'll barely see any mention of the Plymouth brand in the 1964 Valiant brochure, and Plymouth badging on the '64s was minimal. You could get the 1964 Valiant wagon as the base V-100, starting at $2,273, or as the nicer V-200 with its $2,388 price tag (that's about $21,150 and $22,220 in 2022 dollars). Valiant coupes and convertibles could be had with the even swankier (by cheap small-car standards) Signet trim level. As Ford showed us in the middle 2000s, numbers are just classier if you spell them out on emblems. In the middle 1960s, substituting an automatic for the base three-on-the-tree column-shift manual transmission jacked up the price of an affordable car by an eye-watering amount. The Torqueflite three-speed automatic and its slick-looking push-button shifter cost 172 bucks extra (around $1,600 today), which made the car more than 7% costlier. A four-on-the-floor manual was available for the first time in a new Valiant that year, but it cost $180. Also new for the 1964 Valiant was a V8 option (a 273-cubic-incher rated at 180 horsepower), but this car has the good old Slant-6. If it's the engine that came with the car when it rolled off the assembly line, it's a 101-horse example with 170 cubic inches… but these cars are notorious for getting engine swaps early and often and I didn't check the block casting numbers. The cassette deck tells us that it was being driven as recently as the late 1980s through middle 1990s. There's some rust in the usual spots, about what this car would have acquired by 1967 if it had stayed in Michigan. This car could have been restored, though the expense for rust repair and interior refurbishment wouldn't have been a good investment from a financial standpoint.

Fiat Chrysler patent shows a turbocharged inline-six engine

The rumor that Fiat Chrysler is developing an inline six-cylinder surfaced on Allpar more than a year ago. In a follow-up report in December last year, Allpar tapped its sources to add more information, like the codename "Tornado" and the plan for the turbocharged motor to replace the 5.7-liter Hemi V8. Even so, it only made sense to speak of the engine as a rumor at the time. Now we have our first bit of circumstantial evidence, Mopar Insiders having found a patent issued to FCA that uses drawings of an inline-six to describe a system for tracking elements in exhaust gases in a turbocharged inline-six. FCA applied for the patent on November 1, 2017, the U.S. Patent and Trademark Office granted it April 2, 2019. As with everything else in a patent application, the drawing cannot be an accident. The U.S. PTO granted two other engine-related patents to FCA on March 19 and April 2 this year, and FCA used drawings of a V6 in both of those applications. The December Allpar report presumed one version of the Tornado engine would get a single, twin-scroll turbo and slot into service with Chrysler, Dodge, Jeep, and Ram. Another version with twin turbos, and perhaps revised heads, could do time with Alfa Romeo, Maserati, and perhaps SRT. Mopar Insiders doesn't break down turbo count, but cites its sources as revealing an output range of 360 horsepower up to 525 horsepower. FCA's E-Booster technology, originally mentioned as a way to help a revived Alfa Romeo 8C get 700 hp, will enable larger turbos on performance versions of the Tornado I-6. E-Booster electrifies some aspect of the turbocharger — FCA hasn't got into the details yet — to eliminate lag while providing 25 percent more power. Mopar Insiders' output figures would give the engine long enough legs to replace the 3.2-liter and 3.6-liter Pentastar V6s, as well as the 5.7-liter Hemi V8. The site said the Tornado will also replace the canceled 7.0-liter Banshee V8. The 3.0-liter Tornado Global Medium Engine Turbocharged 6 (GME T-6), based on the Hurricane 2.0-liter GME four-cylinder (GME I-4), is expected to go into FCA products around the world. We'll wait to see how the PSA merger might affect allocation. Displacement will come in a hair below three liters so as to avoid tax thresholds in certain countries, and it was said engineers were trying to keep the inline-six no more than three inches longer than the 2.4-liter Tigershark four-cylinder.