Rare Find 1 Of 9,415 Made All Original Very Solid Classic Collector Car Wow !! on 2040-cars

Auto blog

2017 Chrysler Pacifica Hybrid: The 80-MPGe minivan [w/video]

As automakers rush to add hybrids and plug-ins to every type of vehicle, one popular segment has been overlooked: minivans. If the idea of a hybrid minivan makes sense to you, that's because it's a smart idea, and one that we're surprised hasn't happened yet. So kudos to Chrysler for not just making it happen, but for creating a plug-in version with an estimated 80 miles per gallon equivalent. You can read all the practical details of the 2017 Pacifica (not Town & Country) here. For the sake of this story, we'll focus on what's different with the hybrid model. Yes, Chrysler is just calling it Pacifica Hybrid, not Plug-In Hybrid, because the company's executives think that when people hear "plug" they think "range anxiety" and freak out. That's not a worry here, though, because when the 16-kWh battery runs out of juice, the 3.6-liter Pentastar V6 kicks in and the minivan functions as normal. Just don't run out of gas. With a full charge, the Pacifica Hybrid can travel up to 30 miles on electric power. And though the gas engine is the same 3.6-liter V6 found in the non-hybrid model, it's detuned to 248 horsepower and 230 pound-feet of torque. Charging the battery takes just two hours on a 240-volt plug, and Chrysler houses the battery pack underneath the floor in the middle of the van, where the wells for Stow 'N Go seating are found on gas-only models. So no, you can't get Stow 'N Go seats on the hybrid, but the third row does still fold into the floor. Powertrain aside, the Pacifica Hybrid is nearly identical to its gas-only sibling, save the addition of the charge port on the driver's side front fender. Unique wheels in 17- and 18-inch sizes can be had, and the Pacifica Hybrid only comes in Touring and Limited Platinum trims. You can read more details on the hybrid system in the release below. First hybrid powertrain in minivan segment "Due to its large footprint and multiple daily trip patterns, the minivan is ideally suited for electrification technology," said Bob Lee, Vice President and Head of Engine, Powertrain and Electrified Propulsion Systems Engineering, FCA – North America. "The all-new 2017 Chrysler Pacifica lives up to this promise and then some, with efficiency, power and refinement." Launching in second half of 2016, the Pacifica Hybrid is the industry's first electrified minivan.

Poor Chrysler 200 sales blamed for 1,420 layoffs in Sterling Heights

FCA will indefinitely lay off a total of 1,420 workers from its Sterling Heights Assembly and Stamping plants on July 5, according to The Detroit News. This decision will cut a 1,300-person shift that builds the Chrysler 200, and it will also affect 120 people who stamp the sedan's components. The company's statement said the decision would "better align production with demand." FCA plans to give these folks open full-time positions as they become available. Chrysler 200 sales are down 63 percent to just under 18,000 units so far in 2016. After the cuts, there will still be one shift to build the 200, but even then the model won't have much of a future. In January, CEO Sergio Marchionne announced that FCA would discontinue production of the 200 and Dodge Dart because customers were no longer interested in small sedans. All of the roughly 3,000 hourly workers at Sterling Heights have been on a temporary layoff since February 1, according to The Detroit News. They don't go back to work until next week. United Auto Workers Vice President Norwood Jewell released a statement saying that while the "shift reduction at Sterling Heights Assembly is unfortunate, it is not unexpected." However, he was fairly upbeat about the cuts because FCA plans to increase production capacity for trucks and SUVs. "I believe that in the long term this move will be a positive one for our members and the company," he said. During last year's labor negotiations, the UAW's deal reportedly included an agreement for FCA to move 200 and Dodge Dart production to Toluca, Mexico, but the company promised to build the Ram 1500 at Sterling Heights Assembly. FCA spokesperson Jodi Tinson gave no comment about future vehicles at the factory when asked by Autoblog. Related Video: Statement Regarding Indefinite Layoffs at SHAP In order to better align production with demand at its Sterling Heights Assembly Plant, FCA US notified the State of Michigan, the City of Sterling Heights and the UAW today that it intends to return the plant to a one shift operation, beginning July 5. The Company will place indefinitely laid off employees in open full-time positions as they become available within the Detroit labor market based on seniority. A Statement from UAW Vice President Norwood Jewell on FCA Announcement about Sterling Heights Assembly: While today's announcement of a shift reduction at Sterling Heights Assembly is unfortunate, it is not unexpected.

Plymouth Belmont: Running, driving, Virgil Exner-owned concept car could be yours

Concept cars are such bittersweet things. They're often gorgeous and exciting, but all too often they never see production in even the most watered-down forms. And even then, the beautiful shapes aren't usually driveable. But in the case of this 1954 Plymouth Belmont concept, it is drivable, and it could be yours. This curvaceous roadster, which appeared at the 1954 New York Auto Show and was owned at one time by Chrysler styling master Virgil Exner, is driveable because under the long hood is a 241-cubic-inch V8 coupled to a three-speed automatic transmission. It's not a speed demon with just 157 horsepower, but that's OK, because you don't want to accelerate so fast you deprive the world of the Belmont's beautiful body. For a design from the 1950s, it's impressively restrained and elegant. The flanks are completely smooth and flowing, the only interruptions being the shut lines to the small doors. There aren't even door handles on the sides. Chrome and polished stainless accents are left only to the lights, bumpers, grille, and a slender line that runs along the peak of the fenders from stem to stern. Even the fins are small and subtle (relatively). Even the interior is simple and clean. The dashboard is made of machine-turned metal with white on black analog dials and compass-like needles. Everything else is wrapped in a very light beige leather (probably vinyl), and again, polished surfaces are kept to a minimum. Of course the other great part is that this concept is something you could own because it will go for auction at Barrett-Jackson's Scottsdale auction. There's no publicly available estimate for how much money the car may bring, but it does have a reserve, so be prepared with a little extra cash even if you have the winning bid. The auction runs from Jan. 13 to Jan. 21. Related Video: Image Credit: Barrett-Jackson Chrysler Auctions Convertible Concept Cars Classics