2006 Chrysler Crossfire Limited Heated Leather 18s 63k Texas Direct Auto on 2040-cars

Auto blog

2017 Chrysler Pacifica Hybrid electrifies the family hauler

The 2017 Chrysler Pacifica Hybrid is the first-ever hybrid minivan – why didn't anyone think of this before? The extra jolt of electric propulsion lets Chrysler estimate this hauler can get a very green 80 miles per gallon equivalent, with 30 miles of full electric range. To make those amazing numbers possible, the Pacifica Hybrid uses a version of the 3.6-liter Pentastar V6 that runs on the Atkinson cycle for improved efficiency, matched with an electric motor. A 16-kWh lithium-ion battery sits underneath the second-row floor to supply the energy. The PHEV doesn't launch until the latter half of 2016, but Chrysler currently estimates the powertrain's output at 248 horsepower, versus 287 hp from the non-hybrid Pacifica. Charging the system to full takes just two hours from a 240-volt outlet. Other than the charging port just head of the driver's door and different wheel designs, the Pacifica Hybrid looks the same as the other model. The nearly identical styling isn't a bad thing because this is one of the most attractive minivans ever. The aesthetics are similar inside, too, but the battery removes the ability to stow the second row of seats. However, the third row can still fold flat. First hybrid powertrain in minivan segment "Due to its large footprint and multiple daily trip patterns, the minivan is ideally suited for electrification technology," said Bob Lee, Vice President and Head of Engine, Powertrain and Electrified Propulsion Systems Engineering, FCA – North America. "The all-new 2017 Chrysler Pacifica lives up to this promise and then some, with efficiency, power and refinement." Launching in second half of 2016, the Pacifica Hybrid is the industry's first electrified minivan. With an estimated 248 horsepower, the vehicle will deliver an estimated range of 30 miles solely on zero-emissions electric power from a 16-kWh lithium-ion (Li-ion) battery. In city driving, it is expected to achieve an efficiency rating of 80 miles per gallon equivalent (MPGe), based on U.S. Environmental Protection Agency standards. When the battery's energy is depleted to a certain threshold, the Pacifica Hybrid becomes a part-time electric vehicle, like a conventional hybrid. Power to the wheels is supplied by the electric drive system or supplemented by a specially adapted new version of the award-winning FCA US Pentastar 3.6-liter V-6 engine.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.