Moon Roof Heated Seats Wood Trim Auto Lift Gate V8 Power Seats Cross Bars 4x4 on 2040-cars

Auto blog

Maserati Levante will borrow Chrysler Pacifica Hybrid's PHEV powertrain

The plug-in hybrid tech from the 2017 Chrysler Pacifica Hybrid minivan will move seriously upmarket into a future version of the Maserati Levante crossover. The PHEV model should arrive around early 2018 or possibly the end of 2017, division boss Harald Wester told Motor Trend. Wester was blunt about the reason for using the minivan's powertrain. "A standalone program would be suicidal so we have to look at FCA," he said to Motor Trend. However, he expects the PHEV to comprise a tiny portion of the luxury CUV's sales volume – possibly as low as six percent. The Pacifica Hybrid will be the first PHEV minivan in the US when it arrives in the second half of 2016. The powertrain combines a 3.6-liter V6 that runs on the more efficient Atkinson cycle, and two electric motors, which are in the gearbox. A 16-kWh lithium-ion battery under the floor stores the energy for the system. Chrysler estimates the setup can carry the minivan 30 miles purely on electric power and achieve 80 MPGe. The first examples of the Levante should arrive in the US in August, according to Motor Trend. Maserati plans initially to offer its luxury crossover here with two twin-turbocharged 3.0-liter V6s. Base models use a version with 350 horsepower and 368 pound-feet of torque. The S trim gets some extra grunt thanks to a tune that makes 430 hp and 427 lb-ft. Both models come with an eight-speed automatic transmission, all-wheel drive, and a limited-slip differential. The Maserati will have a fleet of posh, European crossovers to fight against, and the PHEV will possibly offer an edge to entice a few green-minded, wealthy customers. Related Video:

8 automakers, 15 utilities collaborate on open smart-charging for EVs

We're going to lead with General Motors here. GM is one of eight automakers working with 15 utilities and the Electric Power Research Institute (EPRI) at developing a "smart" plug-in vehicle charging system. Why did we start with GM? Because it's the first automaker whose press release we read that mentioned the other seven automakers. Points for sharing. For the record, the collaboration also includes BMW, Toyota, Mercedes-Benz, Honda, Chrysler, Mitsubishi and Ford. The utilities include DTE Energy, Duke Energy, Southern California Edison and Pacific Gas & Electric. The idea is to develop a so-called "demand charging" system in which an integrated system lets the plug-ins and utilities communicate with each other so that vehicle charging is cut back at peak hours, when energy is most expensive, and ramped up when the rates drop. Such entities say there's a sense of urgency to develop such a system because the number of plug-in vehicles on US roads totals more than 225,000 today and is climbing steadily. There's a lot of technology involved, obviously, but the goal is to have an open platform that's compatible with virtually any automaker's plug-in vehicle. No timeframe was disclosed for when such a system could go live but you can find a press release from EPRI below. EPRI, Utilities, Auto Manufacturers to Create an Open Grid Integration Platform for Plug-in Electric Vehicles PALO ALTO, Calif. (July 29, 2014) – The Electric Power Research Institute, 8 automakers and 15 utilities are working to develop and demonstrate an open platform that would integrate plug-in electric vehicles (PEV) with smart grid technologies enabling utilities to support PEV charging regardless of location. The platform will allow manufacturers to offer a customer-friendly interface through which PEV drivers can more easily participate in utility PEV programs, such as rates for off-peak or nighttime charging. The portal for the system would be a utility's communications system and an electric vehicle's telematics system. As the electric grid evolves with smarter functionality, electric vehicles can serve as a distributed energy resource to support grid reliability, stability and efficiency. With more than 225,000 plug-in vehicles on U.S. roads -- and their numbers growing -- they are likely to play a significant role in electricity demand side management.

Mopar celebrates 50 years of the 426 Hemi

Think of Chrysler performance and the names Mopar and Hemi are bound to come to mind. Chrysler and its Mopar performance parts division first introduced the original Hemi (so named for its hemispherical combustion chambers) back in 1951, celebrating its 60th anniversary in 2011. But it was thirteen years later - 50 years ago - that the Pentastar automaker rolled out the most iconic Hemi of them all: the Gen II 426.
The massive 7.0-liter V8 engine instantly became a muscle car icon and went on to become a favorite of racecar constructors. Two competition versions of the Gen II 426 Hemi were made: one for the track and one for the drag strip, and both went on to illustrious strings of victories. The race engine first debuted at the 1964 Daytona 500 where it powered Richard Petty's Plymouth to the checkered flag and on to the NASCAR championship.
Meanwhile on the drag strip, the Gen II 426 Race Hemi propelled Don Garlits past 200 miles per hour and down the quarter-mile in 7.78 seconds. Changes in NASCAR regulations meant that Chrysler devoted the engine to NHRA drag racing, and to this day the Gen II 426 Race Hemi is still used in Funny Car and Top Fuel dragsters.