300c 5.7l Cd Traction Control Stability Control Rear Wheel Drive Chrome Wheels on 2040-cars

Auto blog

Chrysler 300 diesel could get green light

Word has it Chrysler is keen to shove its new turbo diesel V6 into a range of models. Wards Auto reports Chrysler President and CEO Saad Chehab has made it clear the automaker is investigating the possibility of using the 3.0-liter oil-burner in the 300. While speaking at an Automotive Press Association luncheon, Chehab said, "It's a matter of how much the customer is willing to pay for that premium. That's the only issue with it."
The Chrysler 300 is sold as the Lancia Thema in Europe complete with a diesel of its very own, and since the Jeep Grand Cherokee is now available with the diesel V6 here in the States, it only makes sense that the engine could potentially show up on the 300 order sheet. Opting for the 3.0 V6 in the Jeep Grand Cherokee will set you back an additional $4,500, however.
Chehab also said the engine could make an appearance in the next-generation Chrysler 200, which is set to debut next year.

Junkyard Gem: 1975 Plymouth Fury Sedan

The Plymouth Fury was once among the most commonplace vehicles on American roads, with the 1970s being the most Furious decade of all. If you've watched a lot of Malaise Era cop shows, you've seen endless examples of the 1975-1978 B-Body Fury sedan; today's Junkyard Gem in Colorado is a civilian version with a very unusual combination of features and options. Though the 1975-1978 Fury is sibling to many much more famous B Platform Chryslers, including the Dukes of Hazzard General Lee and a lot of other highly revered Mopars of the late 1960s and early 1970s, it doesn't get the recognition it deserves today. Would the world be the same if Debbie Harry had posed in her Anya Phillips dress on the bumper of, say, a Ford LTD instead of the iconic '76 Fury on the cover of Plastic Letters? I've got this album cover hanging on my garage wall, right next to Sir Mix-a-Lot's My Hooptie and its '69 Buick Electra. This sun-baked '75 left the assembly line with some nice luxury options for an affordable midsize sedan of its time, including a padded vinyl roof. Factory air conditioning was a $437 option on the Fury in 1975, a price tag that comes to an attention-grabbing $2,185 in 2020 dollars. The MSRP on a Fury sedan that year started at just $3,571 ($17,840 today), so A/C jacked up the cost by close to 15%. The base engine was a 225-cubic-inch (3.7-liter) Slant-6, but this car took the next step up on the Fury engine hierarchy for 1975: a 318-cubic-inch (5.2-liter) V8 making 145 horsepower. Here's where things get a bit weird. That shift lever on the steering column controls a three-speed manual; this rig is commonly known as a three-on-the-tree. The most popular transmission setup on Detroit cars of the 1940s through the early 1960s, the good ol' three-on-the-tree survived here all the way through the 1979 model year in new cars and 1987 in new trucks. By 1975, most lower-priced American mid- and full-sized cars had the three-on-the-tree as base equipment, but by that time nearly every new-car shopper here opted for an automatic transmission or — occasionally — a floor-shifted three- or four-speed manual. The total number of 1975 Fury buyers who sprang for the V8 engine, air conditioning, and a vinyl roof yet still kept the old-fashioned three-on-the-tree transmission setup probably can be counted in the low hundreds, if even that many.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.