2007 Chrysler Pt Cruiser Convertible Automatic Only 18k Texas Direct Auto on 2040-cars

Auto blog

Taking a truly driverless ride in Waymo's Chrysler Pacifica

Today was a first for me: I drove in a fully autonomous vehicle on roads without anyone behind the wheel. They weren't public roads, but they did have intersections, other vehicles, pedestrian traffic, cyclists and more, and the car managed a fairly long route without any human intervention — and without any cause for concern on my part. I've done a lot of self-driving vehicle demos, including in Waymo's own previous-generation Lexus test vehicles, so I wasn't apprehensive about being ferried around in Waymo's Chrysler Pacifica minivan to begin with. But the experience still took me by surprise, in terms of just how freeing it was once it became apparent that the car was handling things all on its own, and would continue to do so safely regardless of what else was going on around it. Waymo's test track at Castle (more on that facility here) included multiple intersections with traffic lights, a roundabout, cars stopped on the shoulder, crossing foot band cycle traffic and more. Even if these were staged, they'd be hard to replicate in exact detail every time, so despite the fact that Waymo clearly had more control here than they would out in the real world, the driving experience was still impressive. In particular, one event stuck with me: A squirrel (or other small rodent, I'm no expert on the fauna of Northern California) darted out quickly in front of the car, before turning back off the road – but the vehicle perceptibly slowed in case it needed to avoid it. Barring an incredibly lifelike animatronic, this isn't something Waymo could've planned for. Regarding how it actually works, once in the vehicle and buckled up, a rider taps a button to start the ride, and then displays mounted on the backs of the front seats show a visualization of what the car's sensors see, but selectively simplified and redesigned to draw focus to things that riders find important, and to reassure them about the system's competence and ability to spot all the key variables on the road. This is essentially the same car driving riders around Chandler, in Phoenix, where the current Waymo pilot is operating. It's still essentially a stock Pacifica van, with a premium trim upgrade, but included features in that vehicle, including the many USB ports for charging located throughout, the dual screens mentioned above on the seat backs, and the rear cabin AC and climate controls all make it particularly well suited to the task of putting the rider first.

Chrysler's Hurricane engine detailed ahead of 2016 launch

We've been hearing distant rumblings about Chrysler's new Hurricane engine for some time now, but details have been hard to come by. Now, Automotive News is adding some specifics to the scuttlebutt, citing Chrysler documents. According to the industry publication, the Hurricane will blow onto the scene in 2016, but it's not an all-new engine. Rather, it will be rooted in the company's existing 2.0-liter four-cylinder Tigershark powerplant (shown above), albeit with "many new technologies to achieve excellent fuel economy."
It's not clear what sort of technologies Chrysler is referring to, but the Hurricane is expected to continue to use an aluminum block, and the finished product is expected to generate even better figures than the existing 2.0-liter's 160 horsepower and 148 pound-feet of torque (as found in the Dodge Dart). Automotive News notes that the updated 2.4-liter Tigershark debuting in the entry-level 2014 Jeep Cherokee has its basis in the 2.0-liter lump, but unlike the smaller engine, it's been fitted with MultiAir2 electrohydraulic variable valve timing to realize 184 hp and 171 lb-ft and greater efficiency.
Perhaps the Hurricane will incorporate the latter in its bag of tricks? Either way, we're hoping for a more generous torque curve than the what's in the current 2.0-liter Tigershark, which is something of a slug in the Dart - even for a base economy compact.

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant