2005 Chevy Trailblazer 4x4 Minor Storm Damage Drives Great "rebuildable Salvage" on 2040-cars

Auto blog

GM removes start/stop from full-size trucks and SUVs with V8 engines

GM is removing start/stop technology from a number of its popular full-size SUVs due to the ongoing chip shortage. This follows the removal of cylinder deactivation technology from some of its trucks, which was also due to the chip shortage. GM Authority first reported the news, but we’ve just confirmed everything with a GM spokesperson.  The following 2021 model year vehicles will be affected: Chevy Tahoe, Chevy Suburban, GMC Yukon, Cadillac Escalade, Chevrolet Silverado 1500 and GMC Sierra 1500. Only versions of those vehicles built with the 5.3-liter V8 or 6.2-liter V8 and mated to the 10-speed automatic will have the tech removed from them. Only vehicles manufactured on or after June 7 will be affected. “By taking this measure, it will enable us to continue production of our high-demand full-size SUV and pickups as the industry continues to rebound and strengthen,” GM said in a statement. Those who ultimately buy one of these vehicles without start/stop technology will receive a $50 discount off MSRP for their troubles. Losing this fuel-saving tech could be a big negative for some, but we know many folks turn it off anyway. Not having to press the button to deactivate start/stop every time could actually be a positive if youÂ’re part of the camp who does that already. 2021 Cadillac Escalade Sport Platinum View 27 Photos On the downside, GM says “most of the affected vehicles will experience a minor reduction in fuel economy.” We donÂ’t have revised window stickers in hand to know how each model will be affected, but any 1 mpg reduction will be rather impactful for vehicles rated as low as these trucks already are. Any reduction will be seen in the city mpg rating, so take the kind of driving youÂ’re going to be doing into account before purchasing. When it comes to greenhouse gas compliance rules, GM says it doesnÂ’t foresee this impacting the companyÂ’s average fleet score. It also intends to begin adding start/stop back to these models as soon as possible, but there will be no retrofit effort made to fit the tech to vehicles already built without it. “Our supply chain organization continues to make strides working with our supply base to mitigate the near-term impacts of the semiconductor situation,” GMÂ’s statement reads. “GM continues to leverage every available semiconductor to build and ship our most popular and in-demand products, including our highly profitable full-size trucks and SUVs for our customers.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

GM recalls 330,000 fullsize trucks for airbag replacement

General Motors has announced a recall of 330,198 fullsize pickups in the US in the aftermath of the announcement made on May 19 that doubled the number of vehicles being called in to replace Takata's defective airbag inflators. That announcement expanded the nationwide recall to an estimated 33.8 million vehicles in the US. Heavy Duty versions of the 2007 and 2008 Chevrolet Silverado and GMC Sierra are included in GM's move, for the purpose of replacing the passenger airbag inflators. The announcement made by the National Highway Traffic Safety Association cited long-term exposure to moisture as a possible cause of the inflator issues. GM says it isn't aware of any problems with the recalled pickups due to moisture, nor has it had any reports of crashes, injuries, or fatalities, and has not received any complaints. GM will notify owners, who can then take their trucks to the dealers to have them repaired free of charge. You'll find a statement from GM and the recall notice from NHTSA below. Related Video: General Motors Statement General Motors is recalling 330,198 2007 and 2008 model year full-size Chevrolet Silverado heavy duty and GMC Sierra heavy duty pickup trucks in the U.S. to replace the passenger air bag inflators manufactured by TK Holdings Inc. (Takata). This recall implements Takata's air bag inflator equipment recall announced on May 19, 2015 (NHTSA recall number 15E-041). GM is not aware of any humidity-related ruptures in Takata air bag inflators in any GM-badged vehicles in the field and knows of no crashes, injuries, fatalities or complaints regarding air bag performance in these vehicles. Including Canada and exports, the total number of vehicles being recalled is 374,715. Population breakdown: United States 330,198 Canada 39,630 Exports 4,887 Total 374,715NHTSA RECALL NOTICE: Report Receipt Date: MAY 28, 2015 NHTSA Campaign Number: 15V324000 Component(s): AIR BAGS Potential Number of Units Affected: 330,198 Manufacturer: General Motors LLCSUMMARY: General Motors LLC (GM) is recalling certain model year 2007-2008 Chevrolet Silverado 2500HD and 3500HD trucks manufactured November 28, 2006, to August 29, 2008, and 2007-2008 GMC Sierra 2500HD and 3500HD trucks manufactured November 27, 2006, to August 29, 2008.