2005 Chevrolet Trailblazer Ls Sport Utility 4-door 4.2l on 2040-cars

Auto blog

GM recalls select Tahoes, Yukons, Escalades for rear driveshaft issue

GM is recalling a number of its full-size SUVs due to an issue with the rear driveshaft assembly that could ultimately result in driveshaft failure. The actual number of total vehicles involved in the recall is small at just 1,789, but it’s spread out across the entire 2021 model year full-size GM vehicle lineup. That means a small number of every model is being recalled, including the Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL and the Cadillac Escalade and Escalade ESV. GM traced the issue back to certain driveshaft assemblies with ball bearings that were not properly heat treated. If theyÂ’re not properly heat treated, GM says that the balls may deform over time, causing noise and vibration. Continue to drive in this condition, and GM says the affected joint in the driveshaft assembly could seize, causing loss of drive power. However, the problem wonÂ’t present itself all at once, as GM says there will be a gradual increase of noises and vibrations before total failure. For those few owners with affected vehicles, GM says that it will replace the left and right rear driveshaft assemblies with properly-built units. Per usual with recalls, this will be done at your local dealership at no cost to the owner. If you have one of the recalled SUVs, expect to be notified mid-March. Related video:

Junkyard Gem: 1980 Chevrolet LUV Mikado

During the 1970s and into the 1980s, each member of the Detroit Big Three imported Japanese small pickups and sold them with Ford (Mazda Proceed), Dodge/Plymouth (Mitsubishi Forte), or Chevrolet (Isuzu Faster) badges here. Ford developed the Ranger and killed the Courier for 1983 (though Americans could still buy the Mazda-badged version all the way through 1993), while The General axed the LUV after the S-10 debuted in the 1982 model year. Isuzu sold the same truck as the P'up through 1987, though, and we might as well follow up our recent P'up Junkyard Gem with its LUV predecessor. LUV stood for Light Utility Vehicle, and I've managed to spot a handful in the boneyards over the years. This one now resides in a yard in northeastern Colorado. The Mikado trim package included striped seat upholstery and a sporty steering wheel, plus these cool dash badges. As far as I can tell, no LUV Mikado advertising featured any Gilbert and Sullivan tunes. This one is fairly rusty for Front Range Colorado, and it has endured a bed swap from some other small truck. The engine is the 75-horse Isuzu 1.8-liter. Members of this engine family went into everything from Chevy Chevettes to Isuzu Troopers in the United States. Very unusually for a small pickup during the Malaise Era, this one has a luxurious automatic transmission. Acceleration must have been a leisurely affair in this truck. Air conditioning? Unheard of! Someone stuck every one of their lunchtime apple stickers on the driver's door. After 41 years of work, this truck is done. Come on strong in a LUV of your own!

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.