Ethanol Flex Fuel 5.3l 4x4 Tow Hitch 3rd Row Seat Running Boards 4wd Alloy Wheel on 2040-cars

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Recharge Wrap-up: Panasonic, Tesla on Gigafactory deal?

Bentley has been awarded the Carbon Trust Standard for reductions of carbon, water use and waste production in manufacturing. The Carbon Trust is an organization that helps groups such as businesses and governments reduce carbon emissions, use of energy and resources, and waste output. From 2011 to 2013, Bentley reduced CO2 emissions by 16 percent per car manufactured, curtailed water use by 35.7 percent, and saw significant waste reductions. Darran Messem of Carbon trust says, "Bentley is clearly passionate about continuing to improve its environmental performance, which is reflected by the fact the company has consistently invested in new technology." Read more in the press release below. Chevrolet is giving 12 Volts to MBAs Across America. The organization will use the range-extended electric cars in its efforts to help MBA students learn from and work with small business owners. As part of the MBAs Across America program's first year, four students drove 8,000 miles to provide entrepreneurs with free business counseling. The program has expanded, and this year, teams of MBAs will use the Volts to travel to 25 cities to offer their services. Learn more about the partnership between Chevrolet and MBAs Across America in the press release below. A professor from the University of Michigan has found fuel cycle analysis to be too flawed to be relied upon for measuring CO2 impacts of transportation fuels. Professor John DeCicco of the university's Energy Institute feels that the flaws in calculating the carbon footprint of liquid fuel production and combustion make such lifecycle analysis impractical. He suggests, instead, to focus to carbon capture. Since capturing CO2 directly from a vehicle is probably never going to happen, DiCicco believes the solution is to capture carbon from the atmosphere in sectors outside of transportation. Says DiCicco, "Research should be ramped up on options for increasing the rate at which CO2 is removed from the atmosphere and on programs to manage and utilize carbon fixed in the biosphere, which offers the best CO2 removal mechanism now at hand. Such strategies can complement measures that control the demand for liquid fuels by reducing travel activity, improving vehicle efficiency and shifting to non-carbon fuels." Read more at Green Car Congress. Global transportation energy consumption is expected to increase by 25.4 percent by 2035, according to a report by Navigant Research.

'Killing a Duramax' Gale Banks YouTube series methodically tunes a diesel to death

Learning or perfecting a skill by watching YouTube videos is known as attending YouTube University. GM Authority picked up on one of the video site's more fascinating courses, hosted by Gale Banks; in a fair world, he should be referred to as Professor Banks when it comes to diesel engines and truck tuning. A few months after GM introduced the updated L5P 6.6-liter Duramax diesel V8 in the 2020 Chevrolet Silverado HD and GMC Sierra HD that ships with 454 horsepower and 910 pound-feet of torque, Banks decided he wanted to methodically tune the engine to death. The purpose of the resulting series, called "Killing a Duramax," is to push more power out of the engine in order to discover which parts break and when — or, as Banks puts it, force-feed the Duramax "until the crank hits the street and the heads hit the hood." With that knowledge, Banks can figure out all the weak points on his way to building what he calls a "Superturbo," that being a supercharged, twin-turbo race engine with more than 1,000 hp. What makes the series fascinating is Banks' knowledge, paired with the company's comprehensive iDash engine monitoring system that keeps tabs on a glut of parameters every step of the way. So for instance, you get Banks explaining the differences between inches of mercury and barometric pressure, how those are different from the water content of the air measured in grains, then showing those readouts on the iDash, then explaining in detail how they affect the air density in the Duramax system. The stock Borg-Warner variable turbo gets a lot of airtime — Banks accuses it of being "out to lunch" because he feels it's the weakest link on the engine. That turns into a turbo teardown and a deep explanation of performance pitfalls, such as when air pressure on the turbine begins to diverge from the boost pressure coming from the compressor. Banks says he can keep close tabs on where power's coming from, because the iDash monitors the horsepower contribution provided by the ambient air, the turbo, and the intercooler separately. The major changes so far are a stouter Precision 7675 turbo and TurboSmart wastegate (episode 5), a twin intake (episode 6), a custom liquid-cooled intercooler from a marine engine, a new GM oil cooler and synthetic oil (episode 10), and new injectors (episode 11).