2017 Chevrolet Tahoe Lt on 2040-cars

Auto blog

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.

Watch the National Corvette Museum sinkhole being filled in by R/C cars

Okay, so not exactly cars, but Bobcats - but still quite cool. You might remember that the National Corvette Museum had that little divot that needed to be filled in. Turns out the construction firm of Scott, Murphy & Daniel doing the work is using two remote-controlled Bobcats to fill the sinkhole with "manufactured sand," which in this case is crushed limestone. It appears that the Bobcat company has offered remote operation since at least 2007 via a wireless transmitter that works up to 1,500 feet away. So yes, that means two SMD employees stand on the edge of the pit and flick joystick levers for hours at a time, one in charge of a Bobcat with a roller-compactor attachment, the other in charge of a Bobcat with a bucket. And that, to us, is a pretty good way to earn the daily bread. Check out the video above for the latest sinkhole update. News Source: National Corvette Museum via YouTube Auto News Weird Car News Chevrolet GM Videos rc car remote control National Corvette Museum bobcat ncm

2016 Chevy Camaro coming on May 16

We officially have a date for the arrival of the sixth-generation Chevrolet Camaro. Fans of Chevy's Mustang fighter should look forward to May 16, and if they're in the Detroit area, they'll want to make their way down to Belle Isle, home of the Chevy Indy Dual in Detroit. We still don't have a great deal of information on the new Camaro, aside from what's been gleaned in spy shots and the like, although Chevy's press release was accompanied by the image shown above. That, friends, looks a lot like the Camaro's badge of old. Its presence here could be an indication that an old logo is set to return to production. That's because what Chevy is planning could best be described as a jamboree, or Camaro-palooza, if you prefer, rather than a typical unveiling. Chevy is inviting up to 1,000 Camaro fans to descend on Belle Isle for a day-long event that will offer up a lot more than their first look at the sixth-generation muscle car. Fans can hot lap the Belle Isle circuit from the passenger's seat of a new Z/28, check out a Camaro "museum," featuring "the most significant vehicles from the brand's history," and chat with some of the Camaro's designers and engineers. "This will be an event Camaro fans will not want to miss," Camaro marketing manager Todd Christensen said in a statement. "This is only the sixth time we have introduced an all-new Camaro. We wanted to share the moment with the customers and fans who have helped make Camaro both America's favorite performance car for the past five years, and a cultural icon since 1967." We'll almost certainly be on hand for the debut (and you'll absolutely be able to get all the details here). And as we said, if you happen to be in the Detroit area in mid May, you can register to attend the unveiling. All you need to do is head over to Chevy's dedicated website for the sixth-generation Camaro and sign up for the big event, on Saturday, May 16. Scroll down for the full press release. 2016 Camaro Drops Cover on May 16 in Detroit DETROIT – Chevrolet is inviting fans to see the all-new 2016 Camaro on Saturday, May 16, in Detroit. The sixth-generation Camaro will cap a day-long celebration on Belle Isle, the 982-acre island park that is home to the Chevrolet Detroit Belle Isle Grand Prix May 29-31. "This will be an event Camaro fans will not want to miss," said Todd Christensen, Camaro marketing manager. "This is only the sixth time we have introduced an all-new Camaro.