2015 Chevrolet Tahoe Ltz on 2040-cars

Auto blog

Chevrolet FNR is a sharp vision of the future in Shanghai

The Shanghai Motor Show is about more than just displaying the latest extended-wheelbase luxury sedans to the Chinese populace. Chevrolet is taking advantage of the event to debut its vision of the future of motoring with the FNR concept, and the capsule looks like it could be fresh from off the set of Blade Runner. The FNR imagines what a fully autonomous, electric vehicle might look like many years from now and is meant to appeal to young, Chinese consumers. The concept's design from the minds at GM's Pan Asia Technical Automotive Center does a pretty neat magic trick, too. Most times it's a mass of glass and curving lines that looks very sci-fi, but then the dragonfly doors open upwards to reveal some knife-edged angles in the styling, as well. As a cutting-edge concept, this capsule is also packed with futuristic tech. Power comes from magnetic hubless electric motors in each wheel, and it could charge wirelessly. Crystal lasers generate the headlights and taillights, and radar in the roof would allow scanning the surroundings for autonomous driving. The interior is similarly imaginative as the rest of the styling. Passengers are enveloped in blue light while sitting in mostly mesh chairs with huge bolsters. Keys have been done away with entirely in favor of iris recognition. Once on the road, the front seats even swivel around to more easily talk with rear passengers. Check it all out in the gallery above for a glimpse a Chevy's vision of what might be next. Related Video: Chevrolet-FNR and All-New Chevrolet Malibu Make Global Debut at Shanghai GM Gala Night 2015-04-19 SHANGHAI – Two Chevrolet models, the Chevrolet-FNR and all-new Malibu, made their global debut this evening at Shanghai GM Gala Night. They were joined by the Bolt EV concept and the 2015 Captiva, which made their China debut. The new models were introduced as Shanghai GM celebrates the 10th Anniversary of its Chevrolet brand in China. They will appear alongside 12 other models on the Chevrolet display at Auto Shanghai 2015, this year's leading auto show in China, which starts tomorrow. Chevrolet-FNR The Chevrolet-FNR is an autonomous electric concept vehicle that offers a glimpse at mobility of the future. It was developed in Shanghai by GM's Pan Asia Technical Automotive Center (PATAC) joint venture. Engineering, design and electrification teams drew on their past experience developing electric concept vehicles.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

First 2015 Chevy Corvette Z06s en route to owners [w/video]

Pretty much right on schedule, Chevrolet has begun shipping the very first customer examples of its 650-horsepower, supercharged Corvette Z06. In fact, according to General Motors, the earliest Z06s could be in customer hands by the end of this week. "It has been an incredible opportunity to work on Chevy's most capable model," said Jeff Lamarche, manager of Chevy's Bowling Green Assembly plant. "It truly is an amazing car, and we're thrilled to get them into the hands of our eager customers." Prices for the Z06 start at $78,995 for the hardtop model, while the first-ever Z06 Convertible kicks off at $83,995. Take a look below for the official press release from Chevrolet, and while you're down there, we've slipped in a new video of Corvette Racing's Tommy Milner taking a hot lap of Road Atlanta in a Z06, complete with some Performance Data Recorder footage. First 2015 Corvette Z06s on Their Way to Customers Most capable model in Chevrolet's history now shipping from Bowling Green BOWLING GREEN, Ky. – Chevrolet is now shipping the all-new 2015 Corvette Z06 coupe from Bowling Green Assembly and some early customers could receive the much-anticipated supercar later this week. "It has been an incredible opportunity to work on Chevy's most capable model," said Jeff Lamarche, plant manager of General Motors' Bowling Green Assembly plant, "It truly is an amazing car, and we're thrilled to get them into the hands of our eager customers." The new Corvette Z06 offers the most choice for customers in the model's history. It is the first Z06 to offer an available eight-speed paddle-shift automatic transmission and, thanks to a stronger aluminum frame, a removable roof panel. In addition, it is the first time since 1963 that the Z06 is available as a convertible – which will arrive in early 2015. The new LT4 supercharged 6.2L V-8 engine is SAE-certified at 650 horsepower (485 kW) at 6,400 rpm and 650 lb-ft of torque (881 Nm) at 3,600 rpm – making the 2015 Corvette Z06 the most powerful production car ever from General Motors and one of the most powerful production cars available in the United States. To balance performance and efficiency, the LT4 leverages a trio of advanced technologies – direct injection, Active Fuel Management (cylinder deactivation) and continuously variable valve timing –with a new, more efficient supercharger. The LT4 helps make the Corvette Z06 the most capable car in the brand's history.