2010 Chevy Tahoe Lt 7-pass Rear Cam Park Assist 77k Mi Texas Direct Auto on 2040-cars

Auto blog

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

GM cutting production at two plants

General Motors is continuing to adjust to excess supply of some of its brands' models. To get production more in line with the vehicles' actual demand, the automotive giant is idling two of its factories in North America in the coming months. The Orion Assembly plant is going to be down from March 9-13, according to an anonymous plant worker and another insider speaking to Automotive News. The factory builds the Chevrolet Sonic and Buick Verano, but there are plenty of both models sitting on dealer lots, including 216 days worth of Sonics, according to AN. The factory already had two idle periods announced to reduce the excess. In addition, downtime is scheduled at GM's "Flex" line at the Oshawa, Ontario, Canada, plant from April 13-17. This affects supply of the Chevrolet Camaro, Impala, Buick Regal and Cadillac XTS. Among them, the automotive giant has the largest supply of Regals ready for dealers with 213 days worth of them, according to AN. The future for the whole Oshawa factory is cloudy in general, though. There are rumors that it could close entirely in the future because the Camaro is leaving and the Regal and XTS might not last much longer than 2017. The Canadian government and the labor union there intend to put up a fight, though. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing Buick Cadillac Chevrolet GM orion assembly oshawa plant idle

2020 Chevy Trax and Buick Encore spied testing

We just recently saw a little crossover SUV from General Motors being tested, and we weren't positive what brand it belonged to. We narrowed it down to Chevy or GMC, but we're feeling more confident that it's a GMC now, since both the next generation Chevy Trax and Buick Encore subcompact crossover SUVs have been spied testing together. Of the two, the Chevy has the more radically different sheet metal. It ditches the somewhat frumpy, lumpy shape of the current Trax for a body inspired by the bigger Chevy Blazer. The roofline has sharp corners, and the hood is wide and flat. The front fascia, though obscured, shows the most connection to the bigger crossover. It has the same split headlight configuration, and it looks as though the grille takes up a sizable section of the fascia. View 7 Photos The Buick Encore on the other hand looks evolutionary in design. The body still has plenty of curves, and the distinctive, sharply rising window sill are all hallmarks of the current Encore design. The headlights and grille are similar, too, though the grille appears to be slightly updated to fit in with the Enclave and Regal. It's understandable that Buick might want to play it safe with the new Encore, since the model is Buick's best seller, selling about 23,000 units in the last quarter, nearly twice that of the next best performer, the Enclave. Since this is the first time we've seen these little crossovers, we expect it will still be a year or two before we get to see them fully revealed. They will probably continue to use small-displacement turbocharged four-cylinder engines with either front- or all-wheel drive. Related Video: