2007 Chevrolet Tahoe Ltz on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

LG Chem ready to double workforce at plant that makes Volt batteries

With a history that involves paying people not to work, the fact that LG Chem is going to hire more people for its electric-vehicle battery plant in Holland, Michigan is good news on a couple fronts for the Korean company. The South Korea-based LG Chem is holding a job fair at the factory about 30 miles west of Grand Rapids. The company wants to double its workforce this year to "several hundred people." LG Chem, whose factory notably makes the cells for General Motors' Chevrolet Volt extended-range electric vehicle battery, is looking for everything from technical operators to maintenance workers to production supervisors. The company held a previous job fair last September that resulted in about 40 people being hired. The prior year, though, LG Chem gained a measure of infamy after the US Department of Energy (DOE) discovered that workers were, for a time, getting paid to do absolutely nothing because low demand for battery packs made it cheaper for the factory to remain idle. With LG Chem also making electric-vehicle battery components for Ford, Renault, Hyundai, and Volvo, though, those lazy days appear to be long gone. Take a look at LG Chem's press release below. Show full PR text LG Chem Michigan Inc. 2nd Job Fair Will Help To Double Its Holland Workforce HOLLAND, Mich., May 13, 2015 /PRNewswire/ -- LG Chem Michigan Inc. (LGCMI) is conducting a 2nd job fair on Thursday, May 14 as part of the company's efforts to double the size of its production workforce in 2015. LGCMI is an air-conditioned, clean room production environment with strong opportunity for career growth. Over 250 people attended the first job fair and the company is looking for more people to help it grow with increased production volume and new models. The company is adding production equipment and new processes and expects to employ several hundred people by the end of the year. Globally, LG Chem has numerous automakers as clients for EV batteries including GM, Ford, Renault, Hyundai/Kia, Volvo, Audi and Daimler etc. The company's push to build its workforce continues on Thursday, May 14 with an all-day job fair at the company's facilities, located at 1 LG Way in Holland. The event will take place from 9:00 a.m. until 6:00 p.m. and is open to everyone seeking employment opportunities with the company. Prospective candidates should plan to meet with members of LGCMI's staff to learn more about opportunities available at this market-leading, advanced-technology manufacturing company.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.