Ltz Ethanol - Ffv Suv 5.3l Cd Air Suspension Locking/limited Slip Differential on 2040-cars

Auto blog

2016 Chevy Malibu gets premium looks, hybrid model

The Chevrolet Malibu was once an automotive icon, but its modern reputation is one for underachievement. A new 2016 model seeks to restore the storied nameplate with improved styling, more interior room and a new hybrid version. It debuts Wednesday at the New York Auto Show. Put simply, "the goal was to put Chevrolet back in the midsize car segment," said John Cafaro, the brand's executive director of car design. In a crowded arena with 2.2 million sales up for grabs annually, Chevy has not been a player. Last year, the brand sold 188,519 Malibus, a six-percent decline from 2013, and fewer than half the number of Toyota Camrys and Honda Accords sold. Despite awards from J.D. Power and Associates and the Insurance Institute for Highway Safety, Chevy knew the Malibu needed a big change. New Skin, Lighter Bones The redesign has been in the works for at least three years. Although the Malibu is still based on GM's Epsilon 2 platform, the underpinnings are more derivative of the Impala than the outgoing model. The body structure makes greater use of high-strength steel, which helps reduce weight by 300 pounds. Size is more Impala-like as well, with 2.3 inches more overall length and a 3.6-inch wheelbase stretch contributing to greater interior space. A new skin covers the Malibu's lighter bones, and design language from the Impala gives its sibling sedan a fresher, more upscale appearance. To execute this premium appearance, Chevy turned to 25-year-old designer Jaymer Starbody, a four-year General Motors veteran and graduate from Detroit's College for Creative Studies. He described the new Malibu as having a "wheel-oriented" design, and the car looks poised to pounce from certain angles. Though the 2016 Malibu is the same width as before, designers stretched the creases and angles in the sheetmetal to create a flatter, sleeker appearance. The hood and cowl are lower, and the Malibu's face sparkles with LED running lamps on the top trim levels. Inside, the roomier cabin has a new center stack, satin chrome accents on the interior panel and a console storage area designed for mobile devices. Chevy MyLink with a seven-inch color touchscreen is standard on lower trims, and the top model upgrades to an eight-inch screen. Perforated leather seats and ambient lighting are also available options. The cabin was designed to look high-tech, but still remain easy to use, according to Chevy interior design director Crystal Windham.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.

Would you pay $17 a month to give your older Ford connectivity?

When it was first introduced in 2007, there was nothing like the original Ford Sync system, since it allowed car owners to connect and use a portable device better than anything that came before it. And because it was a brought-in/tethered and software-based system, Sync leveraged a device's connectivity and was easily updated. It took competitors awhile to catch up: Toyota Entune wasn't available until 2011, and Chevy MyLink didn't roll out until 2012. But now Ford is the one playing catchup since it stuck with the brought-in strategy while most other automakers were quicker to add connectivity via an embedded cellular modem. Ford initially installed 2G/3G modems in its small fleet of electric and plug-in electric vehicles starting in 2012 so that owners could keep tabs on charging. Embedded connectivity came to Lincoln in 2014, and Ford began adding onboard 4G LTE via Sync Connect to select cars starting with the Escape in 2015. To get more cars connected more quickly, last week the automaker rolled out its FordPass SmartLink solution that plugs into the OBD port of 2010 to 2017 model year vehicles. This lets owners retroactively get onboard Wi-Fi, set up a "geo-fence" to keep tabs on a car's location, receive vehicle health reports and allows remote engine starting and door locking/unlocking using a smartphone app, among other features. But to connect older Ford vehicles will cost owners $16.99 a month for two years, not including installation. Ford throws in 1 GB of data or a 30-day trial, whichever comes first, after which owners have to add the vehicle to their Verizon shared data plan, which supplies connectivity for SmartLink, or establish a new account. (Disclosure: Autoblog is owned by Verizon.) By comparison, GM's 4G LTE data plans start at $10 a month for 200 MB and goes up to $30 for 3 GB, and owners can also add a car to an AT&T shared-data plan. But OnStar doesn't have a separate monthly subscription for the embedded modem or an installation charge, and standard features via the RemoteLink Mobile App are free for the first five years of ownership. FCA's Uconnect Access service also uses an embedded modem to provide similar telematics features for $20 per month following a free one-year trial, while a la carte in-car Wi-Fi is offered for $10 per day, $20 per week or $35 per month.