1998 Chevrolet C1500 Suburban Base Sport Utility 4-door 5.7l on 2040-cars

Auto blog

Chevrolet planning low-cost Corvette under Stingray?

If you're burnt out on musings about the Chevrolet Corvette, you'll want to go ahead and skip this post. Motor Trend reports General Motors is hard at work on a low-cost version of the seventh-generation sports car for 2015. Rumored to be called the Corvette Coupe, the car will forgo the Stingray and skip the 450-horsepower 6.2-liter V8 engine in favor of a 5.3-liter V8 with under 400 ponies. If you're keeping track, that's a shade of the same engine found behind the headlights of the 2014 Chevrolet Silverado and GMC Sierra.
The report also suggests the Coupe will receive a number of aesthetic tweaks to separate it from the Stingray, including different front and rear fascias as well as new front fenders and a rear diffuser. Motor Trend says the point of all this is to cut the car's price tag, which means we may see a Corvette on showroom floors for less than $50,000 if this car comes to fruition.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

GM pauses 3.0-liter turbodiesel production due to a supplier shortage

General Motors confirmed it has temporarily stopped taking orders for trucks and SUVs equipped with the 3.0-liter Duramax turbodiesel six-cylinder engine. It blamed the last-minute pause on a supplier-related shortage. Website TFL Truck first reported the news, and a representative from General Motors quickly confirmed it. The spokesperson explained the issue is due to a "temporary part shortage" and added that production will resume "as soon as possible," meaning the Duramax engine (which is called LM2 internally) is not going away permanently. Additional details are not available, so we don't know if the issue is related to the ongoing chip shortage. Rather than delay deliveries and create a backlog, General Motors is reportedly asking its dealers to encourage buyers who want a turbodiesel engine to instead select either the 5.3-liter V8 or the 6.2-liter V8, depending on the model selected. Both are gasoline-powered units. There's no word yet on when Duramax production will resume. The shortage affects several models, including Chevrolet's Tahoe, Suburban, and Silverado 1500 and GMC's variants of these trucks. Cadillac's Escalade is temporarily diesel-less as well. Heavy Duty variants of the Silverado and the Sierra are not affected because they're powered by a different Duramax engine with eight cylinders. Motorists seeking a full-size SUV powered by an efficient turbodiesel engine are temporarily out of options because the Tahoe/Yukon and the Suburban/Yukon XL had the segment to themselves. The Duramax was surprisingly popular, too: in May 2021, GM Authority reported that the turbodiesel straight-six represented 8% of Suburban sales and 6% of Tahoe sales. Installed in a rear-wheel-drive Tahoe, the engine returns 21 mpg in the city, 28 mpg on the highway, and 24 mpg in a combined cycle, figures that make the body-on-frame behemoth more efficient than the unibody, front-wheel-drive Chevrolet Blazer that's 20 inches shorter and approximately 1,700 pounds lighter. Related video: 2021 Chevrolet Tahoe 3.0L Duramax engine