1994 Suburban,super Clean,low Miles,one Owner Fireman,calif Truck on 2040-cars

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Ram 1500 bests new F-150 in MT pickup shootout

Ford's 2015 Ford F-150 is a technological tour-de-force, what with its aluminum-intensive construction and its powerful and efficient new 2.7-liter EcoBoost engine option. But now that it's hit the market, it's time to get down to brass tacks and find out how just the latest F-150 actually stands up to its rivals in the hyper-competitive fullsize segment. Motor Trend is among the first to round up the Ford (in Lariat 2.7-liter 4X4 guise here) and put it up against the Ram 1500 Outdoorsman EcoDiesel 4x4 and 5.3-liter-equipped Silverado 1500 LTZ Z71 to find out how Dearborn's new-think truck measures up. The test put the trio through over 1,000 miles of tough driving in California and Arizona in a variety of conditions from just cruising around unladen to hauling a trailer. MT found all three trucks to be competent, but the most praise got heaped on the Ram and the Ford, with the Chevrolet falling a step behind its competitors in many tests. Among the Ford's most-liked features was its 2.7-liter, twin-turbo V6 that helped make the F-150 easily the quickest of the group, with some editors saying the engine felt about the same whether driving around with cargo in the bed or not. There was some minor turbo lag during acceleration while trailering, but that issue affected the Ram, too. The Ram's powertrain was lauded, as well. The EcoDiesel was torquey around town, and the 1500's combination of an eight-speed automatic and air suspension was judged to be the best of the lot. It was the most difficult to get into the bed, though. The Ram also won the fuel economy award by netting 20-miles-per-gallon city and 28-mpg highway in the test to beat its Environmental Protection Agency ratings of 19/27. The Ford's EcoBoost managed 17/22, one mpg off each from the EPA numbers, and using a lot of throttle really depleted its efficiency. As MT notes, however, it would take time for the diesel's mileage savings to pay off at the pump for these two trucks. In the end, the Ram just barely eked out the win, with the title partially earned because of "the Ford's unknown maintenance and aluminum repair costs," according to MT. Go check out the full comparison to read all of the details, then let us know what you think in Comments.

First 2015 Chevy Corvette Z06s en route to owners [w/video]

Pretty much right on schedule, Chevrolet has begun shipping the very first customer examples of its 650-horsepower, supercharged Corvette Z06. In fact, according to General Motors, the earliest Z06s could be in customer hands by the end of this week. "It has been an incredible opportunity to work on Chevy's most capable model," said Jeff Lamarche, manager of Chevy's Bowling Green Assembly plant. "It truly is an amazing car, and we're thrilled to get them into the hands of our eager customers." Prices for the Z06 start at $78,995 for the hardtop model, while the first-ever Z06 Convertible kicks off at $83,995. Take a look below for the official press release from Chevrolet, and while you're down there, we've slipped in a new video of Corvette Racing's Tommy Milner taking a hot lap of Road Atlanta in a Z06, complete with some Performance Data Recorder footage. First 2015 Corvette Z06s on Their Way to Customers Most capable model in Chevrolet's history now shipping from Bowling Green BOWLING GREEN, Ky. – Chevrolet is now shipping the all-new 2015 Corvette Z06 coupe from Bowling Green Assembly and some early customers could receive the much-anticipated supercar later this week. "It has been an incredible opportunity to work on Chevy's most capable model," said Jeff Lamarche, plant manager of General Motors' Bowling Green Assembly plant, "It truly is an amazing car, and we're thrilled to get them into the hands of our eager customers." The new Corvette Z06 offers the most choice for customers in the model's history. It is the first Z06 to offer an available eight-speed paddle-shift automatic transmission and, thanks to a stronger aluminum frame, a removable roof panel. In addition, it is the first time since 1963 that the Z06 is available as a convertible – which will arrive in early 2015. The new LT4 supercharged 6.2L V-8 engine is SAE-certified at 650 horsepower (485 kW) at 6,400 rpm and 650 lb-ft of torque (881 Nm) at 3,600 rpm – making the 2015 Corvette Z06 the most powerful production car ever from General Motors and one of the most powerful production cars available in the United States. To balance performance and efficiency, the LT4 leverages a trio of advanced technologies – direct injection, Active Fuel Management (cylinder deactivation) and continuously variable valve timing –with a new, more efficient supercharger. The LT4 helps make the Corvette Z06 the most capable car in the brand's history.