Lt New 4 Dr Sedan Manual Gasoline 1.4l L4 Mpi Dohc 16v Turbo Black Granite Metal on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

All of the Bond cars of 'No Time To Die' (caution for spoilers)

Note: The following overview of the cars in No Time To Die contains spoilers. Read at your own risk, or come back after seeing the film to make sure you caught everything.   No Time To Die picks up right around where Spectre leaves us. James Bond (Daniel Craig) and Madeleine Swann (Lea Seydoux) are driving along in Bond’s restored and iconic DB5 in Matera, Italy. Things donÂ’t stay all that cheery for long in picturesque Matera, though. As is tradition in Bond films, the first car chase hits us with an explosion of action in what's a super-long opening scene. Fourth-gen Maserati Quattroporte: The baddies in the beginning are driving a Maserati and chasing after Bond in the DB5. Specifically, theyÂ’re in a fourth-gen Quattroporte, which feels right for a chase scene in Italy. Its squared-off looks are mean enough, and its Italian growl is a good background soundtrack to the DB5Â’s inline-six. In addition to the Quattroporte, the chase scene in Matera is home to a couple of the best stunts of the entire movie, including the arch jump done with a Triumph motorcycle seen in trailers — Matera is extremely hilly. Eventually, Bond and Swann find themselves in the DB5 again together, which is where the famous gatling gun scene from the trailer commences, but not before the bulletproof windows and body of the DB5 are thoroughly tested. RIP to the first-gen Range Rover Classics and Jaguar XFs that joined the Maserati in pursuit of Bond (here's a list of other Bond cars over the years). As the DB5 escape scene concludes, we catch a glimpse of what appears to be a Ferrari from the 1970s. However, the view was far enough away that weÂ’ll need a second look to be sure of the exact model. Land Rover Series III: Next time we see Bond, heÂ’s fishing in Jamaica and driving around a blue Land Rover Series III. ItÂ’s yet another of the many Land Rover products featured throughout the film, and unlike most of BondÂ’s Aston Martins, this one doesnÂ’t seem to have any unique features. The other intriguing vehicle out of Jamaica? An old Chevrolet Bel-Air expertly and effectively piloted by Bond newcomer, Ana de Armas. Next up, we get a few shots of the new and still-not-for-sale Aston Martin Valhalla mid-engine supercar (also seen in trailers). BondÂ’s old boss M is in the scene which appears to have been shot in some secret wind tunnel of sorts. Much to our dismay, nobody ends up driving the Valhalla in the film. Could it be a teaser for what the next 007Â’s car is?

Chevrolet To Oversee Restoring Sinkhole Corvettes

What Mother Earth devoured, Chevrolet plans to resurrect. The carmaker said Thursday it will oversee restoration of the classic cars swallowed by a huge sinkhole beneath the National Corvette Museum in Kentucky. General Motors Design in Warren, Mich., will manage the painstaking work to repair the eight prize vehicles, the automaker said Thursday. The cars were consumed when the earth opened up early Wednesday beneath a display area when the museum in Bowling Green, Ky., was closed. No injuries were reported. The museum was open Thursday except for the area where the sinkhole occurred. Mark Reuss, GM's head of global product development, said the damaged vehicles rank as "some of the most significant in automotive history." "There can only be one 1-millionth Corvette ever built," he said, referring to one of the damaged cars. "We want to ensure as many of the damaged cars are restored as possible so fans from around the world can enjoy them." Just how the cars will be pulled out of the ground remains to be seen, said museum executive director Wendell Strode. The local fire department estimated the hole is about 40 feet across and 25 to 30 feet deep. The hole opened beneath part of the museum's domed section. "We feel pretty confident that most of the cars can be extracted," Strode said Thursday. "And we hope and believe that with just a little bit of luck, that all eight cars can be extracted and be part of the restoration." Chevrolet spokesman Monte Doran said some of the cars look to be in good shape, while others are buried in rubble. "It will likely be several weeks until we can get the cars out and assessed," he said. The GM Design team has helped restore other historic cars, but the Corvette project looks to be its biggest, he said. "These Corvettes are part of our history, and they want them restored properly," Strode said. "We're thrilled they're doing this." The cars looked like toys as they plunged into the hole, piled in a heap amid dirt and concrete fragments. The museum owns six of the cars while two - a 1993 ZR-1 Spyder and a 2009 ZR1 Blue Devil - are on loan from General Motors. The other cars damaged were a 1962 black Corvette, a 1984 PPG Pace Car, a 1992 White 1 Millionth Corvette, a 1993 Ruby Red 40th Anniversary Corvette, a 2001 Mallett Hammer Z06 Corvette and a 2009 white 1.5 Millionth Corvette. Pictures of the sinkhole showed a collapsed section of floor with multiple cars visible inside the hole.