2014 Mylink Radio Bluetooth Dark Titanium Cloth Ecotec Engine on 2040-cars

Auto blog

Chevy's latest Silverado videos assume we're idiots

UPDATE: This article has been revised to reflect that any mention of materials used in a future Chevrolet Silverado is speculation. Can we have a sound, rational debate about the merits of aluminum versus steel? According to Chevrolet's latest marketing videos pitting the Silverado against the Ford F-150, the answer is no. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of course, this will all be a hilarious joke when an aluminum-bodied Silverado comes in 2018. That's an if, as a member of the General Motor public relations team has reminded me that any articles regarding future product are pure speculation. Until then Chevy needs to sell the current Silverado, with its body comprised chiefly of steel, against the Ford F-150's lightweight aluminum panels. Instead of touting the merits of the "most-dependable, longest lasting pickup," the strategy seems to center around negative propaganda towards the 13th element. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of the three videos, the most fair is Silverado vs. F-150 Repair Costs and Time: Howie Long Head to Head. Basically: aluminum costs more than steel, it's more difficult to repair, and requires special equipment for body shops. In terms of Chevy versus Ford, the blue oval truck costs more and takes longer to repair - an average of $1,755 more and 34 more days in the shop, according to the ad. But why stop there when you can have pitchman Howie Long raising an eyebrow at random facts? When Silverado Chief Engineer Eric Stanczak says of the Ford, "It's manufactured in a way that combines aluminum, rivets, and adhesive in a process that's different than Silverado." Long responds, "Huh. Interesting." At the end of the video, Long says "I'd be interested to know what happens to insurance costs." Note he's not saying anything substantive. If Chevy's legal team could sign off on some facts about insurance rates, it would be in this ad. On our Autoblog Cost to Own calculator, there is no significant difference in projected insurance costs between the two trucks. But at least that ad has facts. The other two videos are pure hype. In Cages: High Stength Steel, real people are asked what they think of aluminum and steel in a room with two cages. Then a bear is released into the room, and the subjects scurry to the safety of the steel cage.

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.

GM opens official investigation into C8 Corvette transmission leaks

In March 2020, a month after Chevrolet began customer deliveries of the 2020 C8 Corvette, a GM dealer technician created a Reddit thread about a leaking gearbox in a Corvette with 32 miles. That car hadn't even been sold yet. Since then, as a search of "C8 Corvette transmission leak" shows, it's been tales of woe for some owners. Something in the Tremec TR-9080 transaxle in the back of the mid-engined Corvette doesn't work as it should, the fault able to cause codes that the transmission needs service, or that the driver needs to shift to park. In some cases, the battery would die because of follow-on issues after the initial transmission code, that code preventing the car from powering down. As Autoevolution reports, GM filed paperwork with the National Highway Traffic Safety Administration in August to look into what's going on. Between forum threads and GM's investigation document, there are several issues mentioned. The most common appears to be the dual-clutch transmission leaking fluid due to gasket failures like the one suffered by one owner at 858 miles, and another for an owner currently enduring a second leaking transmission. The Midengined Corvette Forum reported that Chevy engineers redesigned the TR-9080 pan, fitting Corvettes with the new unit at some point in the 2021 model year. The original pan was stamped steel unit affixed to the engine with two studs and 13 bolts, plus "reinforcement plates." The updated pan is said to be a cast aluminum unit affixed with two studs and 17 bolts, omits the reinforcement plates, and gets a new machined new groove around its edge to seat the gasket seal. The GM paperwork now at the NHTSA mentions a P1789 code, and says one reason for it could be "debris on the park position sensor magnet causing an incorrect position reading to the TCM." This might be caused by another issue mentioned in forums, which is clogged transmission filters. GM gives instructions for returning transmission filters to the company, and a poster on one forum said the Corvette tech at the dealer where he bought his Corvette told him the automaker "requires every used transmission filter to be returned to GM."  Whatever's going on, the problems haven't stopped, and they go beyond the P1789 code. Over the weekend, a 2022 Corvette owner posted on Corvette Forums that he got a check engine light on his car after just 850 miles.