2014 Chevrolet Sonic Lt on 2040-cars

Auto blog

GM recalls 740,000 vehicles over daytime running light issue

General Motors is recalling over 740,000 vehicles due to a daytime running light issue that causes all of the affected cars to run afoul of Federal Motor Vehicle Safety Standards. Vehicles affected by this recall are spread across many of GM’s brands. Models include the 2020-2023 Cadillac CT4 and CT5, 2021-2023 Buick Envision, 2022-2023 Cadillac Escalade and Escalade ESV, 2022-2023 Chevrolet Silverado 1500, Suburban, Tahoe and 2022-2023 GMC Sierra 1500, Yukon, and Yukon XL. GM says that the daytime running lights may remain on in these cars when the headlights are activated. This is a problem, because FMVSS rules require that the daytime running lights deactivate once the headlights turn on. If the DRLs remain on, GM says that could result in additional glare, thereby increasing the risk of an accident. The cause of this failure to deactivate the DRLs comes from body control module software that “under a combination of certain pre-conditions, could fail to deactivate the DRLs,” according to GM. Other GM vehicles were tested, but due to a difference in software or hardware, they remain unaffected. If this is reminding you of another recent GM recall, youÂ’d be right, as GM recalled another 340,000 vehicles for the same issue last month. After that original issue was found within GM, the company began looking into its other cars to determine if the population was larger than originally thought. GM found the additional vehicles included in todayÂ’s recall have the problem. The fix will either be via an over-the-air update or it will require you to bring the vehicle into a dealer for a software update, depending on which vehicle you have. Owner notification letters letting folks know what is necessary are currently scheduled to go out on January 23, 2023. Related video: Cadillac Escalade Infotainment Review

GM recalls Colorado, Canyon, and Malibu for airbag problem

The Basics: General Motors will recall and issue a stop sale on 1,740 total examples of the 2016 Chevrolet Colorado, Malibu, and GMC Canyon. This includes 1,579 units in the US and 161 in Canada. The Problem: The second stage of the driver front airbag inflator might not be present. If this happens, the airbag won't fill as quickly as it should in a high-speed crash, which could increase the risk of injury, according to Reuters. This is not related in any way to Takata's inflator problems, and these parts come from a different supplier. Injuries/Deaths: None reported. The Fix: GM will replace the vehicles' airbag assemblies. If You Own One: GM spokesperson Tom Wilkinson told Autoblog he wasn't specifically sure when recall repairs would begin but said it would be "shortly." He expects the fixes to happen "quickly" because of the small number of affected vehicles, and many of them are either in transport or already in dealer stock. More Information: GM recalled the 2015 Canyon and Colorado in 2014 for a completely separate airbag issue. In that case, a manufacturing error improperly wired the connectors. Related Video: GM Statement GM is recalling 1,579 MY 2016 Chevrolet Colorado, GMC Canyon and Chevrolet Malibu vehicles in the United States and 161 in Canada to replace driver-side front airbags. The second stage of the airbag may not deploy properly in certain high-speed crashes. During a routine quality inspection, it was determined that a component required for a second-stage/high-output deployment was not loaded during the inflator build. Dealers will replace the driver-side front airbag assembly. There have been no reports of crashes or injuries related to this issue. This issue is unrelated to the ongoing Takata recalls.

Chevy finishes restoration of damaged 1 millionth Corvette

When a sinkhole at the National Corvette Museum devoured eight, rare examples of the iconic American sports car last year, some of the victims emerged better than others. While damaged, the 2009 Corvette ZR1 Blue Devil was able to drive out under its own power, making for a fairly straightforward restoration. Meanwhile, the one-millionth 'Vette came out looking like a pancake. Bringing the convertible back to perfection has taken four months and 1,200 man-hours, but the milestone car is finally on display again. After being a brief exhibit at the National Corvette Museum, the millionth 'Vette was moved to the General Motors Design Center. There, a 30-person team started on the difficult restoration. "When we disassembled it, we found that each employee involved in building it had signed a part of the car, which was fantastic and moving to see," said GM executive Mark Reuss. Therefore, the team tried to retain as many original parts as possible. The damage was extensive, and repairs included straightening the front sub-frame damage, patching the seats, and carefully restoring the dashboard pad to maintain the signatures below. The hood, front fascia, and side sills were replaced with parts from a donor vehicle. To keep the 'Vette perfect, the team scanned the names and put them on the new components. In one case, they even went back to an original employee to sign a replacement part. Surprisingly, the engine and transmission were fine. With the work done, the National Corvette's Museum's revived exhibit is nearly complete. Five of the other cars aren't being restored, and the museum is bringing the 1962 Corvette back to life. <p>Your browser does not support iframes.</p> Chevrolet Fulfills 1 Millionth Corvette Restoration Pledge Sinkhole-damaged milestone returns to National Corvette Museum 2015-09-03 BOWLING GREEN, Ky. – After more than four months and 1,200 man-hours of painstaking craftsmanship, restoration of the milestone 1 millionth Corvette – a white 1992 convertible – is complete. It was unveiled today at the National Corvette Museum, where it returns as part of the permanent exhibit. The car was damaged on Feb. 12, 2014, when it and seven other rare Corvettes tumbled into a sinkhole that opened beneath the museum's Skydome area. Chevrolet pledged to restore it.