2013 Chevrolet Sonic Rs Hatchback 4-door 1.4l Turbo on 2040-cars

Auto blog

GM cutting Chevy Sonic, Buick Verano production by more than 20%

General Motors' Orion Assembly plant in Michigan is seeing even more production cuts this year to further reduce inventories of the Chevrolet Sonic and Buick Verano. These latest adjustments mean layoffs for about 100 workers in phases starting in July. "GM Orion Assembly will adjust plant production capacity to better align with market demand," the company said in a statement announcing the change. Through May, sales of the Sonic are down 28.5 percent to 29,082 vehicles, and the Verano is off 15.6 percent, with 15,279 sold this year. According to unnamed plant insiders speaking to Automotive News, the assembly rate is slowing at Orion Assembly from the current 33 cars an hour down to 26 an hour, a 21-percent reduction. GM is also reportedly going to keep the plant idle for three weeks during the normal summer shutdown, rather than the usual two. Earlier in the year, the factory was idled for two weeks due to excess supply of the Sonic and Verano. In March, it was closed again for several days for the same reason. The Orion Assembly plant is the future home to the line for the Chevy Bolt EV. GM Statement: GM Orion Assembly will adjust plant production capacity to better align with market demand. A phased layoff of approximately 100 employees will begin in July 2015 and conclude by year-end. Related Video: News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing Buick Chevrolet GM Hatchback Sedan buick verano orion assembly

Fingers point to dragged-out NHTSA investigation after second death by ARC airbag inflator

Safety advocates have increased criticism of the federal government's National Highway Traffic Safety Administration after an exploding airbag inflator that's been under investigation for more than six years killed a second person.  On Wednesday, NHTSA posted recall documents filed by General Motors that revealed the second death, the driver of a 2015 Chevrolet Traverse SUV with an inflator made by Tennessee company ARC blew apart, spewing shrapnel. No details were given about where and when the death occurred. NHTSA has said that ARC Automotive of Knoxville has manufactured about 8 million inflators used nationwide in vehicles made by General Motors, Fiat Chrysler (now Stellantis), Kia and Hyundai. “NHTSA should have been all over this along time ago,” said Rosemary Shahan, president of California-based Consumers for Auto Reliability and Safety. “There's just no denying that itÂ’s a (safety) defect.” NHTSA, the agency charged with with keeping America's automobiles and roads safe, began investigating ARC inflators in July of 2015 after two people were injured by flying shrapnel. The investigation became more urgent in 2016, when a Canadian woman driving an older Hyundai Elantra was killed by metal airbag fragments. Public records show only a little progress on the probe. In April, the agency posted a memo in saying it was reviewing volumes of information it received from ARC. Safety advocates such as Shahan say that the dragged-out investigation is an example of the deadly consequences that can result from an understaffed and underfunded agency. The second death should not have happened, Shahan said, and vehicles with faulty ARC inflators should have been recalled faster. The agency, Shahan said, is “grossly underfunded," but it still should have sought recalls of the ARC inflators. She said historically NHTSA has taken little action during Republican administrations but has ramped up safety efforts when Democrats control the White House. Messages were left Wednesday by the Associated Press seeking comment from NHTSA and ARC. At this time, relatively few vehicles are effected. The GM recall covers only 550 Chevy Traverse SUVs from the 2013 through 2017 model years, as well as Buick Enclave SUVs from 2008 through 2017. The automaker said in a statement that the faulty front driver's airbag inflators were either installed at the factory or in replacement airbag modules.

Chevy confirms 2016 Camaro will have wheels, brakes

Good news, everyone! Chevrolet has issued yet another round of teaser images and information about the sixth-generation Camaro, set to debut in Detroit on May 16. This time around, Chevy's teaser images confirm that the new car will not only have wheels and tires (Goodyear Eagle F1s, no less), but brakes as well. On top of that, we now know that the new Camaro will be 28-percent stiffer than the outgoing model. "The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly," GM said in a press release, which you can read below. We've already learned that the new coupe will be 200 pounds lighter than its predecessor, has a bunch of unique parts, and according to GM's Mark Reuss, will outperform the Ford Mustang in every way. Now, it's only a matter of time before we see the sixth-gen Camaro, but surely not before Chevy issues even more teasers and information. Related Video: 2016 Camaro is Stronger, Lighter and More Responsive Computer aided engineering contributes to 28 percent greater structural stiffness DETROIT – The engineering team spent 9 million hours of computational time honing the driving experience of the all-new 2016 Chevrolet Camaro before the first prototype turned a wheel. The structural modeling led to the Gen 6 Camaro being 28 percent stiffer than the current model. "The modeling abilities of computer aided engineering are advancing at incredible rates," said Jim Karlavage, Camaro program engineering manager. "Today, we can accurately model opportunities to add torsional strength without adding unnecessary mass. The result is a lighter, stiffer structure that benefits every aspect of the driving experience." The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly. "The structural weight savings are compounded by opportunities to reduce un-sprung weight," said Karlavage.