2007 Chevy 3500 Diesel 2wd Dually Lt3 Western Hauler Heated Leather 1 Owner on 2040-cars

Auto blog

Honda, Chevy reveal low-drag speedway aero for Indy 500

As the two automakers currently participating in the IndyCar Series, both Chevy and Honda were invited this year not only to provide engines to the teams on the starting grid, but to develop their own aerodynamics packages as well. Both revealed their designs for the road-course races a few months ago, but with the Indy 500 approaching at break-neck speed, they've now unleashed their aero approaches for speedways. Both are based on the Dallara DW12 chassis introduced to the series a couple of years ago, but sacrifice some of their downforce at the altar of speed. And you can tell as much from looking at them: both Honda (above) and Chevy (below) have streamlined their designs, with single-plane front wings, lower-profile rear wings and fewer winglets on the body and around the wheels in between. The idea is to allow the cars to reach higher top speeds with less drag, while offering the necessary amount of downforce for the banked turns. With the four opening road-course rounds complete, teams using either automaker's equipment will keep the existing aero kits on their cars for the Grand Prix of Indianapolis on the infield course next week, then switch to the speedway package for the Indianapolis 500 later this month. Then it'll be back and forth for the rest of the season as the circus switches between road courses and speedways. Honda Unveils 2015 IndyCar Super Speedway Aero Kit Apr 30, 2015 - SPEEDWAY, Indiana - To be used at the Indianapolis 500 - Manufacturer seeking 11th Indianapolis 500 victory since 2004 - First public running to take place Sunday at Indianapolis Honda today debuted the "Super Speedway" aero kit of aerodynamic upgrades and components its teams will use at this year's 99th running of the Indianapolis 500. The Honda Super Speedway Aero Kit, produced by Honda Performance Development, Honda's racing arm in North America, includes a variety of individual aerodynamic components fitted to the existing Honda-powered Dallara Indy car chassis. All are intended to give Honda's six Indy car teams – encompassing a potential 17 '500' entrants - the ability to maximize performance at the 2.5-mile Indianapolis Motor Speedway oval and other large ovals ( over one mile in length) on the 2015 Verizon IndyCar Series schedule. "We're excited to unveil our Super Speedway aero kit, the newest element in this era of enhanced manufacturer competition in the Verizon IndyCar Series," said Art St. Cyr, president of HPD.

Recharge Wrap-up: U of M wins Solar Challenge, family attempts record-breaking e-bike ride

The University of Michigan Solar Car Team has won the 2014 American Solar Challenge. It is the team's eighth national championship, its fifth in a row, and its first using Siemens' product lifecycle management (PLM) software. The race took place over 1,722 miles and seven days traveling across eight states. The team's car, called "Quantum," outpaced the nearest competitor by four hours. Looking forward, Michigan Solar Car Project Manager Pavan Naik says, "The switch to Siemens tools will give us the ability to model and simulate everything and truly allow us to optimize the performance of our new vehicle. As we start on our quest to win the World Solar Challenge in 2015, we'll be leveraging a full complement of PLM solutions." Read more in the press release below. The EcoCar3 competition, in which teams will convert Chevrolet Camaros into hybrid electric cars, begins in September. The various college teams will have four years to lessen the car's environmental impact as much as possible while maintaining performance and, of course, that cool Camaro design. EcoCar3, which is put on by the US Department of Energy and General Motors, kicks off with a workshop in Novi, Michigan from September 16 - 18. Read more at the DOE website at the dedicated EcoCar3 site or watch the announcement video at our previous post. Zap and Jonway Auto are shifting to a high rate of EV production. Zap already has two lines creating the Urbee EV to met demand, and is switching over a third to make electric minivans and SUVs. The company aims to produce 30,000 EVs by 2015 for the Chinese market. Zap says it has a backlog of 25,000 Urbee orders. Read more in the press release below. A family of four hopes to make a world record-breaking, 6,000-mile electric bike journey this fall. The family, which recently drove from Argentina to Montana in a pickup with a camper, will ride from Montana to Maine, then down the East Coast to Florida in an attempt to break the record for longest electric bicycle ride. They'll use two bikes. The Father, Thomas, will ride one of the bikes carrying one of the children, while the rest of the family rides in a support vehicle, with the mother, Dylan, riding the second bike when they can find others to drive. They have started a crowdfunding campaign for some of the equipment needed to document the trip. See the video below or read more at Treehugger.

Chevy Bolt 200-mile EV going into production near Detroit

Where there's smoke, there's fire, apparently. The rumors of the Chevy Bolt going into production have been proven correct, with an announcement this morning at the Chicago Auto Show that the 200-mile, all-electric Bolt will be built at the Orion Assembly facility near Detroit. GM didn't say exactly when the Bolt will be built, but GM North America president Alan Batey said in a statement that, "We are moving quickly because of its potential to completely shake up the status quo for electric vehicles." He's not kidding. GM is talking about a $30,000 price tag for an EV that can do twice as many electric miles as any non-Tesla mass-production EV today. Previous hints have the Bolt starting production next year for a market debut in 2017, and with all of the accuracy we've seen from these secret releases up to now, we're going to say this is probably accurate until we hear otherwise. We still have questions about the price tag, but for now we'll try to track down more information here in Chicago. Chevrolet Commits to Bolt EV Production Game-changing, long-range EV to be built at Orion Assembly facility in Michigan CHICAGO – Chevrolet this morning confirmed production of its next-generation pure electric vehicle, based on the Bolt EV concept. It will be built at General Motors' Orion Assembly facility near Detroit. GM North America President Alan Batey made the announcement ahead of the Chicago Auto Show. The Bolt EV concept was introduced last month at the North American International Auto Show in Detroit. "The message from consumers about the Bolt EV concept was clear and unequivocal: Build it," said Batey. "We are moving quickly because of its potential to completely shake up the status quo for electric vehicles." Leveraging the industry-leading battery technology found in the Chevrolet Volt and Spark EV, the Bolt EV concept was developed as a game-changing, long-range pure electric for all 50 states, designed to offer more than a GM-estimated 200 miles of range at a target price of around $30,000. The progressively styled concept vehicle features selectable driving modes for preferred driving styles, such as daily commuting, and it was designed to support DC fast charging. "We're proud that Chevrolet has decided to produce the Bolt EV here in Michigan at the Orion Assembly facility," Gov. Rick Snyder said. "Michigan unquestionably remains the global automotive leader.