2007 Chevy Silverado 2500hd Lt Ext Cab Diesel Tow 47k Texas Direct Auto on 2040-cars

Auto blog

2016 Chevy Camaro to drop 200 pounds

The sixth-generation Chevrolet Camaro makes its grand debut on May 16 at a big celebration on Detroit's Belle Isle. Until then, Chevy's strategy seems to be showing off the pony car's new components piece by piece. With the exhaust headers and front end already on display, the Bowtie is now giving a glimpse at some of the upcoming model's aluminum components. The Camaro is going on a diet for its latest generation, and Chevy claims that the switch to the Alpha platform and other new components shed over 200 pounds compared to the current model. That will put the pony car at around 3,500 pounds. The lower weight will contributes to better fuel economy, quicker acceleration and more direct handling, according to the automaker. Among the changes are aluminum front and rear suspension assemblies (pictured above) that weigh 21 percent less than the current units. Also, Chevy promises in its announcement "links on some models feature an intricate, structurally optimized design made with a rigid composite material that's even lighter than aluminum." In addition to these improved parts, the Camaro uses the lightweight metal for the beam that supports the instrument panel to save 9.7 pounds more. The only two pieces reportedly carrying over to the latest design are Chevy's bowtie and SS badges, and at least one engine in the range is known to be a version of the 6.2-liter LT1 V8. With over a month until the next Camaro's debut, we might get a glimpse of even more of the car's new parts in the coming weeks. Related Video: 2016 Camaro Does More with Less New model is at least 200 pounds lighter than current car 2015-03-30 DETROIT – For the all-new, 2016 Chevrolet Camaro, the team was challenged to improve the handling, acceleration and fuel economy of the award-winning current model. To meet all three objectives, the team focused on a singular mission: reduce mass. By obsessively searching for opportunities to save ounces, the team pared more than 200 pounds off the Camaro compared with the fifth-generation model. As a result, the Camaro does more with less, according to Al Oppenheiser, Camaro chief engineer: "We kept the cornering confidence and control that make the Gen 5 Camaro 1LE so fun to drive, and added a greater sense of agility," he said. "The new Camaro brakes harder, flicks into corners more quickly, and drives out of the corner faster.

NHTSA probes 2010 Chevy Tahoe for side airbag issue

After a person was killed in a rollover accident in a 2010 Chevrolet Tahoe in Texas in 2011, the National Highway Traffic Safety Administration is considering whether to conduct a deeper investigation into a potential problem with the model's side airbags. According to the petition filed with the government agency, the SUV's rollover side curtain airbag deployed in the accident, but the design allegedly still allowed some of the occupants in the second- and third-row seats to be ejected from the vehicle. One of them died in the crash. Based on NHTSA's preliminary review, this is the only report of this type of incident happening in a 2007-2015 Tahoe or GMC Yukon. "GM investigated the complaint that is the basis of the petition and found no defect trend," company spokesperson Alan Adler said to The Detroit News, and said the automaker will cooperate with the feds. Still, "a defect petition has been opened to evaluate the issue and make a grant or deny decision," according to NHTSA. Depending on the agency's findings, this could lead to a full investigation and possible recall affecting an estimated 58,000 vehicles. INVESTIGATION Subject : Rollover Side Curtain Air Bags Date Investigation Opened: JUN 11, 2015 Date Investigation Closed: Open NHTSA Action Number: DP15004 Component(s): AIR BAGS All Products Associated with this Investigation Vehicle MakeModelModel Year(s) CHEVROLET TAHOE 2010 CHEVROLET TAHOE HYBRID 2010 Details Manufacturer: General Motors LLC SUMMARY: The Office of Defects Investigation (ODI) has received a petition requesting an investigation of alleged defects that can cause occupant ejections during rollover crashes in certain General Motors vehicles. The petition alleges the defects allow second and third row occupants to be ejected despite the deployment of rollover side curtain air bags. The petition cites a 2011 Texas crash involving a model year 2010 Chevrolet Tahoe, which allegedly resulted in multiple occupants to be ejected. One of the ejected occupants was fatally injured. ODI's preliminary review of its consumer complaint data found no similar reports of occupant ejections on 2007-2015 Chevrolet Tahoe and GMC Yukon vehicles. ODI also reviewed Early Warning Reporting data submitted by General Motors. A defect petition has been opened to evaluate the issue and make a grant or deny decision.

1972 Dodge Challenger on an M1009 CUCV military frame is YES

The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.