2001 Chevy Silverado 2500hd Extended 4dr 6l on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

NHTSA probes 2010 Chevy Tahoe for side airbag issue

After a person was killed in a rollover accident in a 2010 Chevrolet Tahoe in Texas in 2011, the National Highway Traffic Safety Administration is considering whether to conduct a deeper investigation into a potential problem with the model's side airbags. According to the petition filed with the government agency, the SUV's rollover side curtain airbag deployed in the accident, but the design allegedly still allowed some of the occupants in the second- and third-row seats to be ejected from the vehicle. One of them died in the crash. Based on NHTSA's preliminary review, this is the only report of this type of incident happening in a 2007-2015 Tahoe or GMC Yukon. "GM investigated the complaint that is the basis of the petition and found no defect trend," company spokesperson Alan Adler said to The Detroit News, and said the automaker will cooperate with the feds. Still, "a defect petition has been opened to evaluate the issue and make a grant or deny decision," according to NHTSA. Depending on the agency's findings, this could lead to a full investigation and possible recall affecting an estimated 58,000 vehicles. INVESTIGATION Subject : Rollover Side Curtain Air Bags Date Investigation Opened: JUN 11, 2015 Date Investigation Closed: Open NHTSA Action Number: DP15004 Component(s): AIR BAGS All Products Associated with this Investigation Vehicle MakeModelModel Year(s) CHEVROLET TAHOE 2010 CHEVROLET TAHOE HYBRID 2010 Details Manufacturer: General Motors LLC SUMMARY: The Office of Defects Investigation (ODI) has received a petition requesting an investigation of alleged defects that can cause occupant ejections during rollover crashes in certain General Motors vehicles. The petition alleges the defects allow second and third row occupants to be ejected despite the deployment of rollover side curtain air bags. The petition cites a 2011 Texas crash involving a model year 2010 Chevrolet Tahoe, which allegedly resulted in multiple occupants to be ejected. One of the ejected occupants was fatally injured. ODI's preliminary review of its consumer complaint data found no similar reports of occupant ejections on 2007-2015 Chevrolet Tahoe and GMC Yukon vehicles. ODI also reviewed Early Warning Reporting data submitted by General Motors. A defect petition has been opened to evaluate the issue and make a grant or deny decision.

More Corvette Stingray Factoids: Vanishing panel gaps and 26-mpg LT1

During January's Detroit Auto Show, we managed a longer than expected wandering tag-team interview with C7 Corvette chief engineering exec Tadge Juechter (pictured above), and LT1 engine boss Jordan Lee (pictured below). They are, quite honestly, two of the very nicest bigshot lads to ever walk the engineering corridors of an American manufacturer. Both are enthralled by what they're doing for a day job. So are we.
We've followed the pre-sale anticipation for the Chevrolet C7 Corvette Stingray like an Oreck vacuum yanking every speck of dirt from a well-trampled carpet. Everything is reportable and contains a grain of further knowledge about this dramatically important and cheered-for car, as it continues to be pressured into representing all that is superior about the American dream. The Corvette wears one heavy cloak.
So, most of what was talked about has been expertly reported already right here on Autoblog. But, looking through our notes again, both Jeuchter and Lee added facts to the buzzing mix.