03 Chevrolet Silverado 4x4 Duramax 4'' Lift Crew Cab on 2040-cars

Auto blog

Chevy recalls 73k Cobalts for side airbag non-deployment

Chevrolet is recalling 73,424 examples of the 2010 Cobalt in the US and Canada because the driver's side curtain airbag might not deploy in a crash. These vehicles carry build dates between January 4 and June 23, 2010, and, specifically, 59,474 of them are in the US. "GM is aware of one crash with one injury that may be related to this condition," the company said in a statement. The problem occurs because of improper routing of the side-impact sensor wiring harness in the driver's door, and there can be a short circuit causing the curtain airbag not to deploy. The campaign to fix the issue will begin on August 26. Dealers will inspect the vehicles and will repair the issue on any affected examples. Related Video: GM Statement: General Motors is recalling 59,474 2010 Chevrolet Cobalt sedans in the U.S. because some of them may have been built with improper side impact sensor wire routing in the left front door. Dealers will inspect all suspect vehicles and any found with the condition will be repaired free of charge to the customer. GM is aware of one crash with one injury that may be related to this condition. Including vehicles sold in Canada, the total recall population is 73,424. RECALL Subject : Improperly Routed Side Impact Wire Harness Report Receipt Date: AUG 10, 2015 NHTSA Campaign Number: 15V500000 Component(s): AIR BAGS Potential Number of Units Affected: 59,474 All Products Associated with this Recall Vehicle Make Model Model Year(s) CHEVROLET COBALT 2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2010 Chevrolet Cobalt vehicles manufactured January 4, 2010, to June 23, 2010. The affected vehicles may be equipped with an improperly routed Side-Impact Sensor (SIS) wiring harness in the driver side front door. The misrouted wiring harness could cause an electrical short that disables the driver side curtain air bag. CONSEQUENCE: A disabled driver side roof-rail air bag will not deploy in the event of a crash necessitating deployment of that air bag, increasing the risk of injury to the driver. REMEDY: GM will notify owners, and dealers will inspect the sensor's wiring in the driver's door and make repairs as necessary, free of charge. The recall is expected to begin August 26, 2015. Owners may contact Chevrolet customer service at 1-800-222-1020. GM's number for this recall is 15075.

GM recalls 83,572 SUVs for ignition switch issue

General Motors is recalling 83,572 SUVs from the 2011 and 2012 model years over a potential ignition lock actuator issue. In affected vehicles, the actuator isn't the right size, which could cause the ignition to get stuck in the "Start" position, and then either due to a jarring event or a "cool interior temperature" the ignition could switch back to the "Accessory" position. Doing so would cause a loss of power assistance and the airbags might not deploy. This is a different ignition issue than the one that's been ongoing for the past year. GM said it expects that less than 500 vehicles suffer from the problem, but that the pool could include vehicles from 2007 through to 2014 that have already been fixed, but with defective parts. The 2011-2012 SUVs included in the National Highway Traffic Safety Administration notice: Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. GM will notify owners and dealers will inspect the ignition lock housing to see if it needs a free replacement. RECALL Subject : Ignition Lock Actuator may Bind Report Receipt Date: DEC 30, 2014 NHTSA Campaign Number: 14V827000 Component(s): ELECTRICAL SYSTEM Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2011-2012 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. In the affected vehicles, the ignition lock actuator may bind, making turning the key difficult or causing the ignition to get stuck in the "Start" position. CONSEQUENCE: If stuck in the "Start" position, the ignition may suddenly snap back into the "Accessory" position, causing a loss of engine, steering, and braking power, increasing the risk of a vehicle crash. If the vehicle is in a crash, the air bags may not deploy, increasing the risk of occupant injury. REMEDY: GM will notify owners, and dealers will inspect and replace the ignition lock housing, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact GM customer service at 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14696 for the original equipment, and 14912 for the service replacement parts.

Honda, Chevy reveal low-drag speedway aero for Indy 500

As the two automakers currently participating in the IndyCar Series, both Chevy and Honda were invited this year not only to provide engines to the teams on the starting grid, but to develop their own aerodynamics packages as well. Both revealed their designs for the road-course races a few months ago, but with the Indy 500 approaching at break-neck speed, they've now unleashed their aero approaches for speedways. Both are based on the Dallara DW12 chassis introduced to the series a couple of years ago, but sacrifice some of their downforce at the altar of speed. And you can tell as much from looking at them: both Honda (above) and Chevy (below) have streamlined their designs, with single-plane front wings, lower-profile rear wings and fewer winglets on the body and around the wheels in between. The idea is to allow the cars to reach higher top speeds with less drag, while offering the necessary amount of downforce for the banked turns. With the four opening road-course rounds complete, teams using either automaker's equipment will keep the existing aero kits on their cars for the Grand Prix of Indianapolis on the infield course next week, then switch to the speedway package for the Indianapolis 500 later this month. Then it'll be back and forth for the rest of the season as the circus switches between road courses and speedways. Honda Unveils 2015 IndyCar Super Speedway Aero Kit Apr 30, 2015 - SPEEDWAY, Indiana - To be used at the Indianapolis 500 - Manufacturer seeking 11th Indianapolis 500 victory since 2004 - First public running to take place Sunday at Indianapolis Honda today debuted the "Super Speedway" aero kit of aerodynamic upgrades and components its teams will use at this year's 99th running of the Indianapolis 500. The Honda Super Speedway Aero Kit, produced by Honda Performance Development, Honda's racing arm in North America, includes a variety of individual aerodynamic components fitted to the existing Honda-powered Dallara Indy car chassis. All are intended to give Honda's six Indy car teams – encompassing a potential 17 '500' entrants - the ability to maximize performance at the 2.5-mile Indianapolis Motor Speedway oval and other large ovals ( over one mile in length) on the 2015 Verizon IndyCar Series schedule. "We're excited to unveil our Super Speedway aero kit, the newest element in this era of enhanced manufacturer competition in the Verizon IndyCar Series," said Art St. Cyr, president of HPD.