2014 Chevrolet Silverado 1500 Work Truck on 2040-cars

Auto blog

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Weekly Recap: Racing legend Jim Hall explains Chevy's futuristic Chaparral concept

"I said our cars are built to be winners." – Jim Hall Racing legend Jim Hall never thought he'd be a video game consultant, but when Chevrolet asked for his advice to create a futuristic Chaparral for the Vision Gran Turismo series, he was eager to help. He reviewed early sketches and suggested some changes that made it onto the concept, including the addition of a camera that's mounted onto a mast over the cabin to aid the driver. The Chevy Chaparral 2X Vision Gran Turismo concept was revealed this week at the Los Angeles Auto Show and will be part of a downloadable update for PlayStation 3's Gran Turismo 6 in December. Theoretically, at least, it uses a laser-beam propulsion system and an air-powered generator to produce 900 horsepower in the video game. It's capable of sprinting to 60 miles per hour in 1.5 seconds en route to a top speed of 240 mph. Those gaudy performance specs – even in the virtual world – came at Hall's urging. "I said our cars are built to be winners," Hall told Autoblog on the floor of the Los Angeles show. The 79-year-old drove Lotus racecars in Formula One before launching the successful Chaparral Cars in the 1960s. Like his innovative Can-Am racers, the Vision Gran Turismo project has an eye toward the future. It also introduces the iconic Chaparral name to a new generation of fans, and hopefully, Hall says, gets them excited about engineering and design. "It emulates what we did in the '60s," he said. And what they did back then still resonates. Chaparral Racing and Chevy partnered more than 45 years ago for development work on the composite monocoque chassis, lightweight alloy powertrains, automatic gearboxes and active aerodynamics. "He [Hall] walked right back into this and was able to apply thinkings and learnings," said Clay Dean, General Motors executive director of advanced design. The Chevy Chaparral 2X Vision Gran Turismo concept was created at GM's North Hollywood advanced design studio, and it will be on display at the show through November. Other News and Views Sebastian Vettel joins Ferrari team in 2015 Ferrari confirmed that four-time Formula One World Champion Sebastian Vettel will join the Scuderia for the 2015 season, jettisoning Ferrari's current ace, two-time champ Fernando Alonso. Vettel has been F1's most successful driver since Michael Schumacher, though he's struggled to match his previous accomplishments in 2014.

2016 Chevy Corvette Z06 C7.R Edition brings track style to the road

The Chevrolet Corvette has a long history of excelling at endurance racing, and continues to dominate today. To celebrate that legacy, Chevy is bringing some of the look of its track machine to the road with the 2016 Corvette Z06 C7.R Edition. These machines might be gone faster than the racecar's lap time around Le Mans, because the company is building just 500 of them. All of these track-inspired, special editions are based on the 650-horsepower, supercharged Z06 in the top 3LZ trim, and they also come equipped with the Z07 Performance Package that includes carbon-ceramic brakes, adjustable aero elements, and Michelin Pilot Sport Cup 2 tires. Offered as a coupe or convertible, these 'Vettes use some tricks to match the style of the C7.R. They're available in the racer's traditional bright yellow livery, but black is optional. Unpainted carbon fiber trim (including material for the hood) and grilles that are painted Spectra Gray Metallic also add to the motorsport look. The car rides on a set of black wheels with Corvette Racing logos on the center caps. Inside, buyers of this limited edition are nestled in Competition Sport Seats that are upholstered in Jet Black leather. Suede microfiber accents with yellow stitching cover the steering wheel, gearshift, instrument panel and doors. Plus, there's some additional carbon fiber trim for good measure. Each car also comes with a cover with C7.R graphics. Chevy isn't disclosing the price for the Z06 C7.R Edition yet, but the limited edition model is slated to hit the market later this year. Related Video: CHEVROLET INTRODUCES 2016 CORVETTE Z06 C7.R EDITION 24/04/15 Track-to-street connection honored with limited production model BOWLING GREEN, Ky. – Chevrolet today introduced the 2016 Corvette Z06 C7.R Edition – a road-going, track-capable homage to the Corvette Racing C7.R racecars. It's offered in Corvette Racing's signature yellow livery – or black – with coordinated exterior and interior accents. Only 500 examples of the C7.R Edition will be built and all will include the Z07 Performance Package with carbon ceramic brakes, as well as a specially serialized vehicle identification number. They go on sale later this year. "Corvette Racing's legacy and technology were significant influences on the development of the Corvette Z06 and the new C7.R Edition honors the direct link between the racecar and the production model," said Harlan Charles, Corvette product and marketing manager.