2014 Chevrolet Silverado 1500 Swb on 2040-cars

Auto blog

Corvette Z06 and Viper TA square off at the strip

There are many long-standing grudge matches among automobiles: 911 vs GT-R, Mustang vs Camaro, Ferrari vs Lamborghini... but as far as high-end American metal goes, it doesn't get much more legendary than Viper vs 'Vette. So after Chevy released the new Corvette Z06, we knew it was only a matter of time before it would have to square off against the Viper TA. And what better place to pit these two parallel pillars of American performance than on the drag strip? Fortunately that's just what we have here. In one corner, the 2014 Dodge Viper TA, with its 8.4-liter V10 pumping out 640 horsepower and 600 pound-feet of torque. In the other, the 2015 Chevrolet Corvette Z06, the supercharger on its 6.2-liter V8 more than making up for the discrepancy in displacement and cylinder count to produce 650 hp and just as much torque. But numbers don't tell the whole story, so watch the video clip to see which reaches the end of the quarter-mile first. News Source: To the Floor via YouTubeTip: James Chevrolet Dodge Videos drag race chevy corvette z06 quarter mile drag strip srt viper ta

2020 Ford Explorer vs 3-row crossover rivals: How they compare on paper

The 2020 Ford Explorer has finally landed, and if history serves as an indicator, it should be bigger than sliced bread. And people sure love themselves some sliced bread. This new Explorer may look familiar on the outside, but beneath the skin is a radically new rear-drive platform related to the Ford Mustang (as opposed to a front-drive platform related to the Ford Taurus and a Volvo from the 1990s). Turbocharged four- and six-cylinder engines now exclusively rest under its hood, which as you'll see below, both better anything its competitors offer. Ah, but if you're curious to know how the new 2020 Explorer compares to its various three-row family crossover rivals, take a look at the chart below where we stack it up against the 2019 Chevrolet Traverse, 2019 Honda Pilot, 2020 Hyundai Palisade, 2019 Subaru Ascent and 2019 Toyota Highlander. There are others of course (Mazda CX-9, Dodge Durango, GMC Acadia, VW Atlas), but we only had so much room on the chart, and these were the newest and/or most likely to be cross-shopped with the new Explorer. Engine specs and towing Although the Traverse's V6 just nips it on horsepower, the 2020 Explorer's base 2.3-liter "EcoBoost" turbocharged four-cylinder engine smokes it on torque. Therefore, "best-in-class" power seems like a fair claim from Ford. That there's also a 365-horsepower turbo V6 available, plus a hybrid and even-more powerful ST model on the way shows that Ford isn't kidding around under the hood. Curb weight also seems competitive for the segment. In terms of drivetrain, the Explorer is the only member of this particular group to come standard with rear-wheel drive (2.3-liter only). The Durango is the only other three-row, non-luxury crossover to do so. This is significant for two reasons: First, you could potentially do a power slide in an Explorer. Second, and more important, those in the Snowbelt will have to opt for all-wheel drive (it comes standard with the 3.0-liter). By contrast, a set of winter tires will probably do the job just fine if you want to save some money and gas by sticking with its rivals' standard front-wheel drive. Well, except for the Subaru Ascent — that's standard with AWD. In terms of towing, the Explorer takes the cake with as much as 5,300 pounds for the four-cylinder and 5,600 pounds for the V6. Everything else tops out at 5,000, though again, the Durango is capable of besting them all thanks to its Hemi V8 engine option.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.