2014 Chevrolet Silverado 1500 High Country on 2040-cars

Auto blog

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).

Some 2012-13 Chevy Volts may not have enough battery coolant

The 2012 and 2013 model year Chevrolet Volt extended-range plug-in vehicle may have a battery glitch caused by low coolant levels. No recall has been issued and General Motors is taking care of the issue at no cost to drivers. Some of the affected Volts may have lower-than-advisable coolant levels because of some pesky air pockets in the car's cooling circuit. When the coolant levels get too low, the charging system for the battery powering the car's onboard generator (i.e. the Rechargeable Energy Storage System, or the RESS) may be shut down, turning one's Volt into a run-of-the-mill gas-powered car, and a pricey one at that. The Car Connection says GM is advising owners of the '12 and '13 Volts to contact their local Chevy dealer for a free fix. GM representatives didn't immediately respond to a request for comment from AutoblogGreen for more details. We believe this is a separate issue than the one that brought 8,000 Volts back to the dealers for a battery coolant fix, what GM called a "voluntary customer satisfaction effort," a few years ago. General Motors sold 23,094 Chevy Volts last year after selling 23,461 Volts in 2012, so that fix-it list may get fairly lengthy. Check out a GM-Volt.com user thread related to this issue here. *UPDATE: Chevrolet spokesman Randy Fox confirmed in an e-mail to AutoblogGreen that the company issued a service bulletin to dealers that they may need to top off coolant levels on certain Volts because of the issue, and that the vehicle will "return to normal charging operation" once that's done.

Callaway rolls out radical Corvette C7 GT3-R at Hockenheim

Leave it to Callaway to take a badass Corvette and make it even more so. Case in point: the new Callaway Corvette C7 GT3-R you see here. It made its big debut this past weekend during the season finale for the ADAC GT Masters series at the legendary Hockenheimring – the on-again, off-again home of the German Grand Prix. Why in Germany, you ask? Because that's where Callaway Competition is based. The racing division got its start in Heilbronn as Woeher & Ciccone back in 1985. It joined with US-based Callaway Cars in 1988 to distribute its modified Corvettes in Europe, and branched out into constructing racing cars in 1994. And this is its latest project. Designed in partnership between Callaway Competition in Germany and Canadian designer Paul Deutschman, the new GT3-R replaces the previous C6-based Z06.R GT3. It packs a 6.2-liter V8 pumping 600 horsepower through an X-Trac six-speed sequential gearbox. And as you can see, it sure looks the part. Callaway will be offering the new GT3-R to privateer teams for entry in a variety of racing series around the world. But it'll also be fielding the example you see here, sponsored by Whelen Engineering that – like Callaway Cars – is based in Connecticut. Callaway Corvette C7 GT3-R World Debut at Hockenheim October 3, 2015 Hockenheim, Germany – October 3, 2015 – This weekend's ADAC GT Masters Season Finale was the backdrop for the unveiling of Callaway Competition's new Callaway Corvette C7 GT3-R. Following a brief presentation to media and invited guests, the successor of the C6-based Callaway Z06.R GT3 was displayed to the public for the first time on October 3, 2015 at the Hockenheimring in Germany. Constructors of GT race cars since 1990 and based in Leingarten Germany, Callaway Competition possesses a wealth of experience, technical know-how and a broad network of specialized professional partners. These elements were crucial to conduct such a large undertaking. After nearly two years of comprehensive planning, intensive development and expert fabrication of vehicle components, Callaway Competition completed the first C7 GT3-R just a few weeks ago. Its striking design comes as a result of the collaboration between Canadian designer Paul Deutschman and team owners Giovanni Ciccone and Ernst Wohr. Mike Gramke, Uwe Hoffmann, Florian Mohring and Andre Zanke were also heavily involved in the vehicle's development.