2014 Chevrolet Silverado 1500 on 2040-cars

Auto blog

Chevy Corvette is latest car breached by hackers

UPDATE: This story has been updated with comment from General Motors. In the latest car-hacking exploit in a summer full of them, researchers from the University of California-San Diego say they've found a way to manipulate braking in a 2013 Chevrolet Corvette. The vulnerabilities may not be limited to that model. Cyber-security researchers breached the car's security systems via a device they had plugged into the Corvette's OBD-II port, and through that connection, they sent messages that could turn windshield wipers on and off and tamper with the brakes as the car drove at low speeds. It's the latest in a series of car hacks that involve access to critical systems obtained via the OBD-II port, where drivers can plug in devices that provide anything from diagnostic information for mechanics to driving information for insurance companies. Last November, cyber-security engineers from Argus Cyber Security remotely controlled vehicle functions in a car that had a OBD-II dongle called a Zubie installed. In January, researchers from Digital Bond Labs found security holes in an information-tracking dongle popular with more than 2 million Progressive Insurance customers. Those came before prominent hacks unveiled in recent weeks, in which researchers remotely commandeered control of a Jeep Cherokee and, separately, showcased problems with GM's OnStar infotainment system. Regarding the dongles that plug into the OBD-II ports, Stefan Savage, a Cal-San Diego professor involved in the research, tells WIRED that, "we acquired some of these things, reverse-engineered them, and along the way, found that they had a whole bunch of security deficiencies." Savage and others unveiled the latest study at the Usenix security conference Tuesday. In a video of their exploit entitled "Fast and Vulnerable," they show how they sent SMS messages from a smartphone to the dongle plugged into the car's OBD-II port. From there, their messages accessed the CAN bus, a network on the car that connects individual electronic control units, which control dozens of vehicle functions. As they send the commands to brake the car, the driver of the Corvette notes "the pedal doesn't react to any pressure." General Motors issued a written response Wednesday, warning drivers to be careful with third-party devices they plug into their OBD-II ports.

President Obama will be on Comedians in Cars Getting Coffee

The seventh season of Jerry Seinfeld's excellent Comedians In Cars Getting Coffee will debut on Wednesday, December 30, and if this first trailer is any indication, the guest lineup is damn impressive. But rather than building up to one big guest over the course of the season, the show is starting with one of the biggest guests possible – the president of the United States. President Barack Obama will join Seinfeld behind the wheel of what looks like a 1963 Chevrolet Corvette Stingray for a trip around the South Lawn of the White House. According to CBS, the pair will enjoy their coffee in the staff dining room, which is probably a better idea than crippling Washington, D.C., with a Stingray-led motorcade. Aside from the president, Seinfeld has recruited a couple comedy icons, including first-timers Will Ferrell and Steve Martin. Also appearing are Garry Shandling, Sebastian Maniscalco, and Kathleen Madigan. The four-wheeled stars will include the Corvette, a Plymouth Superbird, a Chevy Camaro, a classic Porsche 911, a BMW 2002, and what we think is a (rather troublesome) 1952 Siata 208 8V Coupe Balbo. You can check out the entire trailer up at the top of the page. News Source: Crackle via YouTube Celebrities TV/Movies BMW Chevrolet Porsche Coupe Performance Classics Videos jerry seinfeld comedians in cars getting coffee cicgc will ferrell

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.