2010 Silverado 1500 4x4 Z71 Lt Red Low Mileage on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

GM recalling 316k vehicles due to headlamp faults

General Motors has announced a recall covering 316,357 vehicles globally, due to the possibility of sporadic or permanent failure of the low-beam headlamps. 273,182 of these vehicles are in the United States, while the remaining affected units are in Canada, Mexico, and elsewhere. This recall includes the 2006-09 Buick LaCrosse (pictured above), 2006-07 Chevy TrailBlazer and TrailBlazer EXT, 2006-07 GMC Envoy and 2006 GMC Envoy XL, 2006-07 Buick Rainier, 2006-08 Saab 9-7X, and 2006-08 Isuzu Ascender. In an email sent to Autoblog, General Motors explains that if the headlamp driver modules are not functioning correctly, "the low-beam headlamps and daytime running lamps could intermittently or permanently fail to illuminate." GM states that this problem does not affect things like high-beams, turn signals, marker lamps, or foglamps. As of this writing, GM states it "has not been able to confirm whether the HDMs in these vehicles caused any vehicle accidents." The National Highway Traffic Safety Administration has been notified, but the recall has not yet posted to the government agency's website. Scroll down to read the full details in GM's email. General Motors is recalling 273,182 Buick LaCrosse sedans and Chevrolet, GMC, Buick, Saab and Isuzu midsize SUVs in the U.S. for possible intermittent or permanent loss of low beam headlamps. Affected models are: 2006-2009 Buick LaCrosse sedans; 2006-2007 Chevrolet TrailBlazer and 2006 TrailBlazer EXT; 2006-2007 GMC Envoy and 2006 Envoy XL; 2006-2007 Buick Rainier; 2006-2008 Saab 9-7X and 2006-2008 Isuzu Ascender midsize SUVs. If the headlamp driver modules is not operating correctly, the low-beam headlamps and daytime running lamps could intermittently or permanently fail to illuminate. This condition does not affect the high-beam headlamps, marker lamps, turn signals, or fog lamps. GM has not been able to confirm whether the HDMs in these vehicles caused any vehicle accidents. The total population, including the U.S., Canada, Mexico and exports from North America is 316,357. The NHTSA was sent the Part 573 information for this recall on November 25. It has not yet posted to the NHTSA website. Featured Gallery 2008 Buick LaCrosse CXS News Source: General Motors Recalls Buick Chevrolet GM GMC Isuzu Saab SUV Sedan chevy trailblazer buick rainier isuzu ascender

2019 GMC Sierra revealed with CarbonPro bed and new diesel engine

It's only March, and it's already been one hell of a year for trucks. January's Detroit Auto Show saw the reveals of the 2019 Ram 1500, 2019 Ford Ranger and the 2019 Chevy Silverado. The Chicago Auto Show brought new versions of the Toyota Tacoma and Toyota Tundra TRD Pro. Today, we finally got our first look at the Silverado's twin, the 2019 GMC Sierra. The truck features new styling, a new diesel engine and — on the Sierra Denali — a carbon fiber bed. As with every new full-size truck, the Sierra is larger than the outgoing model in almost every dimension, though exact dimensions haven't been revealed. For reference, though, the Chevy Silverado's bed is 7-inches wider than before. The new Sierra grille is more upright than before and features new C-shaped lighting. The Denali gets LED headlights, tail lights and fog lights. Both SLT and Denali trims get unique 22-inch wheels. As we saw in spy photos, the Sierra's interior is mostly just a copy of the Silverado's with some chrome accents sprinkled throughout. If you like the current truck interiors, you'll be pleased with the new model. Those hoping for a wholesale change will be left wanting. The big improvements inside include a full-color heads-up display, trailer hitch assist apps and cameras, and the rear-camera mirror found in models like the Chevy Traverse and Cadillac CT6. Safety and convenience features include a surround-view camera, blind-spot monitoring, pedestrian detection and low-speed automatic braking. Like the Silverado, there's been a significant effort to cut weight in the new Sierra. The 2019 model loses as much as 360 pounds compared to the current truck. It uses aluminum for the doors, hood and tailgate. Steel is still used for the fenders, roof and standard cargo box. The Denali, however, gets the real surprise here. Available only on the top-tier trim, the bed box will be constructed of carbon fiber rather than steel, saving 62 pounds. Carbon fiber only replaces the steel inner panels and floor. GMC says the carbon fiber will also help scratch and corrosion resistance. SLT and Denali models also get a new MultiPro tailgate. This is unique to the Sierra and separate from the Silverado's power assist unit. A new feature that helps one get into and out of the bed using an assist handle. The tailgate step has a maximum weight capacity of 375 pounds. There multiple positions that allow customers to extend the bed, or drop the center vertically to gain easier access to the back.