2003 Chevy S-10 Pickup on 2040-cars

Auto blog

Jay Leno gets pulled over while roaring in a Corvette Z06 convertible

No one is above the law, even if that person is a certain silver-haired auto enthusiast with a popular weekly video series about the cars in his garage. This week, Jay Leno experiences the 2015 Chevrolet Corvette Stingray Z06, but he also gets to have a meeting with some of California's Finest immediately after a high-speed blast. As opposed to the full-bore Z06 coupe with the seven-speed manual, Leno gets behind the wheel of the slightly heavier convertible version with the eight-speed auto. Being a droptop doesn't bother him too much, but Leno makes it obvious he wishes that he could be shifting for himself. Even if the auto is technically quicker, Leno says that swapping gears gives him something to do while driving. Of course, one of the major advantages of the convertible is the ability to listen to the Z06's thumping V8 unimpeded. With 650 horsepower and 650 pound-feet of torque from 6.2-liters of supercharged muscle, it already puts down impressive numbers, but the sound might just be the best part of all. Around town, the 'Vette is quiet enough to easily blend in with the rest of traffic. However, tip the throttle down and the valves in the exhaust open up to turn the engine into roaring monster. Be careful where you make this thing howl, though, because it's pretty easy for the police to take notice. The host finds that out the hard way in this week's episode of Jay Leno's Garage. Related Gallery 2015 Chevrolet Corvette Z06 Convertible View 18 Photos News Source: Jay Leno's Garage via YouTube Celebrities Chevrolet Coupe Performance Videos Jay Lenos Garage chevy corvette stingray chevy corvette z06

Callaway, Lingenfelter boost Corvette Z06 way beyond 700 hp

With 650 horsepower and just as much torque on tap, few would accuse the latest Corvette Z06 of being down on power. But for those who'll always demand more, two leading Corvette tuners have just announced new tuning packages for the Z06 to boost Chevy's flagship well beyond 700 horsepower. The more powerful of the two comes from Callaway Cars, which has added a larger supercharger, a triple-action intercooler, and more to increase output to a massive 757 horsepower and 777 pound-feet of torque. The result, according to Callaway, is a 0-60 time quoted at 2.8 seconds and a quarter-mile run in 10.5. The package also includes a reshaped hood, all manner of trim upgrades, and a three-year warranty, and will set you back nearly $17k on top of the cost of donor vehicle that currently lists for $79,000. In what could only come second relative to Callaway's kit, Lingenfelter Performance Engineering has also released a Stage 1 package for the Z06. The kit includes a new dry sump damper, upgraded supercharger pulley and drive belt, and more – all of which Lingenfelter says will boost the Vette's output up to 720 hp and 730 lb-ft. Revised performance figures weren't released, but despite the 37-horse, 47 lb-ft deficit, we doubt it'd trail Callaway's by much. But both would likely leave the stock Z06 in their dust, and you can read more about them in the press releases below. Related Video: Callaway Cars Releases Their Most Powerful Corvette - 757 bhp / 777 lb-ft - Z06-based Corvette upgrade boasts 32% larger supercharger, triple intercoolers, and consistent power - lap after lap The Numbers - Callaway Cars today announced power numbers and performance for the flagship model in their performance car lineup. Equipped with Callaway's GenThree Supercharger, the Corvette Z06 now produces 757 bhp @ 6,200 rpm and 777 lb-ft @ 4,500 rpm (SAE). A launch to 60 mph is now achieved in 2.8 seconds, and a quarter-mile in 10.5 seconds at 131 mph. Why Go Big, When You Can Go Bigger? - Size Matters. To reach that power (which is up from 650 bhp / 650 lb-ft) the supercharger itself needed to be bigger since the output of a positive displacement supercharger is proportionate to its size. The Callaway GenThree supercharger is 32% larger in displacement (2300cc vs 1740cc). Cooling - Callaway engineers recognize that a key contributor to maximizing power is reduction of inlet air temperature associated with forced induction.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.