Chevy C4500 Kodiak Custom on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

GM drops diesel engines for 2020 Chevy Equinox and GMC Terrain crossovers

GM is officially discontinuing the diesel engine in the Chevy Equinox and GMC Terrain for the 2020 model year. The 1.6-liter turbodiesel was always an oddball of an engine in the compact crossover segment, and now the experiment has come to an end. The Car Connection initially reported the news, and a GMC spokesperson, Stuart Fowle, confirmed it to us this morning.  “A huge majority of our Terrain customers have opted for one of our two gas engines," says Fowle. We canÂ’t say this eventuality comes as a massive surprise, as we saw news from couple of months ago that GM was dropping all-wheel drive from the diesel-powered cars for 2020. Low demand was cited as the reason for that cull, and itÂ’s the same for the little GM crossovers this time around, too. These vehicles were the only ones powered with a diesel engine in their class, but thatÂ’s going to be changing. Just as GM is going away from the diesel, Mazda is finally bringing its diesel to market in the CX-5. YouÂ’ll only be able to get that engine in the most expensive ($42,045) trim level, combined with all-wheel drive, though. The cheapest Equinox diesel starts at a comparably low $30,795. ThatÂ’s a $2,400 upcharge over the base 1.5-liter turbo four-cylinder, and the value is questionable. Mileage is better, but diesel fuel is more expensive. Towing capability didnÂ’t increase over the base engineÂ’s 1,500-pound capacity, but the extra torque around town was nice. As diesels go in the U.S., this one was rather rough and noisy, possibly contributing to some turning their noses up after a test drive. Perhaps another reason for its demise was that the much quicker 2.0-liter turbo Equinox was only $100 more than the diesel. This engine offered significantly better towing at 3,500 pounds, too. You can read all about what we thought of the diesel in our first drive review here, but the 2019 model year is the last one if you had it on your shortlist. This article has been updated to indicate the source.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: