1957 Chevy Truck Big Back Window -v8- 1955-1956-1957 " Last Posting" on 2040-cars

Auto blog

2016 Chevy Volt will start at $33,995*

One of the biggest mysteries regarding the 2016 Chevy Volt has been revealed. Chevy announced today that the next-gen plug-in hybrid will have an MSRP of $33,995, which includes GM's $825 destination fee. That's a few hundred dollars less than the current Volt, which has an MSRP of $34,170. The second-gen Volt is about more than a price cut, though. The car has an increased all-electric range (50 miles vs. 38 in the current model) and better fuel economy. Once the battery power runs out – which it doesn't do, in most situations, since 90 percent of all trips are electric-only – the no-longer-premium-only gas engine offers 41 miles per gallon, up from 37 mpg. We know most buyers are price-conscious, and with the still-available federal tax incentive of up to $7,500, the new Volt can be had for $26,495. That should put a spring back into sluggish Volt sales, which are down 46 percent year-over-year so far in 2015. Through the end of April, GM has sold a cumulative 76,136 first-gen Volts since introducing the car in 2010. Chevrolet Announces 2016 Volt Pricing Next Gen delivers more technology at new price as low as $26,495 DETROIT – The Chevrolet Volt is poised to continue to bring new owners to the electric plug-in family. Pricing will be as low as $26,495 after the full federal tax credit of $7,500. (Federal tax credit can range from $0 up to $7,500.) In California, the vehicle's largest market, residents of the state will be able to purchase the all-new Volt for as low as $24,995 after state and Federal incentives. The 2016 model will start at $33,995 MSRP, including an $825 destination fee (excluding tax, title, license and dealer fees). This is almost $1,200 less than the current generation Volt. "The next generation Chevrolet Volt delivers more technology, the ability to drive further between gas fill ups and now with even more value to our customers. It's what our loyal Volt owners told us they wanted," said Steve Majoros, Director, Chevrolet Marketing. "We are confident we will continue to attract new customers to Volt with the vehicle's product improvements and attractive price." The Volt continues to be a success with the brand with nearly 70 percent of Volt owners trading in a non-GM product or adding to their household fleet in 2014, the highest of any Chevy nameplate. The number one trade-in for the Volt is the Toyota Prius. To date more than 75,000 first generation Volt owners have driven hundreds of millions of EV miles.

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: