1951 Chevrolet 3100 Series Pick Up Street Rod on 2040-cars

Auto blog

2020 Chevy Silverado HD vs. 2019 Ram, Ford heavy duty trucks: How they compare on paper

Last year was all about the latest in light-duty full-size pickup trucks, so this year, Ram, Ford and Chevy are launching the heavy-duty variants. The first out of the gate is the redesigned 2019 Ram 2500 and 3500 HD, and Ram dropped all the pertinent specs with the reveal. Chevy followed with the new Silverado HD in Chicago, and Ford revealed updates to the Super Duty at the same show. Ford hasn't released details on output, payload capacity, towing capacity or pricing for the updated Super Duty. As such, we'll be comparing the current Super Duty with the all-new Silverado HD and Ram HD. Both Chevy and Ram have revealed full specs for each of their respective trucks, leaving out only pricing, which we've estimated based on the outgoing models. You can see the raw details in the chart below, followed by extra information and analysis. Some things to keep in mind: These specifications cover all versions of the Ram HD, Silverado HD and Super Duty, such as 2500 and 3500 models, and all the way up to F-450. Specifications can vary widely based on engine, drivetrain, cab and bed configurations, so be sure to take a close look at the specific model you're interested in when you get particularly serious about buying. And of course, be sure to check out our car comparison tool if you'd like to look at other trucks on the market. Engines and drivetrains All three of these trucks offer gasoline and diesel engines, but only the Ram has two versions of the diesel. Starting with gas engines, Ram's 6.4-liter V8 has the power advantage with 25 more horsepower than the next-most-potent Super Duty, but the new Silverado HD's 6.6-liter V8 takes the torque crown at 464 pound-feet, nearly 35 more than the other two gas engines. The Ram is also the only one to pair an eight-speed automatic with the gas engine, whereas the Ford and Chevy make do with a six-speed. With diesel engines, horsepower is a weak point for the Ram. The Ram's entry-level turbo 6.7-liter inline-six is the weakest, as the only one with under 900 pound-feet of torque and under 400 horsepower. Even the high-output version only makes 400 horsepower, while the Chevy makes 445 and the Ford 450. But the tables turn with torque, as the Ram makes a best-in-class 1,000 pound-feet followed by the Ford's 935 and the Chevy's 910. Both the Ram and the current Super Duty diesels each get a six-speed automatic, but the new Silverado HD's diesel gets a 10-speed unit.

Watch a 2015 Corvette Z06 run the quarter in 11.7 seconds

We're not writing about this because it's an amazing run, we're writing about it because it appears to be the first run. Someone took a 2015 Corvette Z06 to Royal Purple Raceway in Baytown, Texas and blasted it down through the quarter mile. It's still wearing the dealer number in wax pen on the windshield and dealer plates, so this example is fresh from the mold. It's also a seven-speed manual. General Motors said the row-your-own Z06 can do the 'strip in 11.2 seconds, and they undoubtedly had a professional driver and more than one run to set that time. To have Just Some Guy show up at the raceway and do an 11.7 at 120.54 mph on his first run means we expect good things to come as Z06s get delivered to their owners. Check out the run in the video.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.